Angular Contact Ball Bearings

Detailed Description

Design features: Angular contact ball bearings in the inner and outer rings on the raceway, And the internal and external circles for the relative displacement axial bearing. This means that the design of the bearing ring compound is used to bear load, The radial and axial load load at the same time role. LHB angular contact ball bearings in a wide range of design and size of production, Commonly used types of single row, Double row angular contact bearings and sealed double angular contact ball bearings and four point contact ball bearings. We can produce the diameter from 10mm~240mm LHB single row angular contact ball Bearings. 10mm~110mm LHB double row angular contact ball bearings 、 Sealed double row angular contact ball bearings and four point contact ball bearings etc, Following is the internal structure of LHB different product descriptions. A 30° Contact angle AC 25° Contact angle B 40° Contact angle CA Bearing for universal matching. Two bearings arranged back- To- Back or face- To- Face will have an axial internal clearance smaller than Normal (CB) before mounting CB （CB）Bearing for universal matching. Two bearings arranged back- To- Back or face- To- Face willl have a Normal axial internal clearance before Mounting CC Bearing for universal matching. Two bearings arranged back- To- Back or face- To- Face will have an axial internal clearance greater than Normal (CB) Before mounting DB Two bearings matched back- To- Back DF Two bearings matched face- To- Face DT Two bearings matched in tandem E Optimized internal design F Machined window- Type steel cage, Ball centred GA Bearing for universal matching. Two bearings arranged back- To- Back or face- To- Face will have a light preload before mounting GB Bearing for universal matching. Two bearings arranged back- To- Back or face- To- Face will have a moderate preload before mounting GC Bearing for universal matching. Two bearings arranged back- To- Back or face- To- Face will have a heavy preload before mounting J Pressed window- Type steel cage, Ball centred M Machined window- Type brass cage, Ball centred MB Machined brass cage, Inner ring centred N1 One locating slot (notch) in the large outer ring side face N2 Two locating slots (notches), 180° Apart, In the large outer ring side face P Injection moulded window- Type cage of glass fibre reinforced polyamide 6, 6, Ball centred PH Injection moulded window- Type cage of glass fibre reinforced polyetheretherketone (PEEK), Ball centred P5 Dimensional and running accuracy to ISO tolerance class 5 P6 Dimensional and running accuracy to ISO tolerance class 6 W64 Solid Oil filling Y Pressed window- Type brass cage, Ball centred