Quick Details

• Material:

  Metal

• Metal:

  Gcr15

• inner race:

  45mm

• outer race:

  125mm

• outer Length:

  90mm

• inner Length:

  92mm

• Keyway:

  14*3.8

• Holes:

  8*M8

• Torque:

  1620N.m

• Weight:

  6.2kg

Product Name:One Way Clutch Bearings MZ45

One Way Clutch Bearings MZ45

Product Description:

Installation and Usage
1. MZ Series Cam Clutch is Shielded by shield bearings on both ends, packed with a special grease, and are ready for use. No additional lubricant is required.
2. For attaching pulleys, gears or sprockets to the clutches, insert hubs (with f7 tolerance of ISOR773) along the inner surface of the outer race and screw the bolts (high tension) into the tapped holes on the clutch end.
3. Recommended shaft tolerances are shown in the table on the lower left.
4. External thrust load should be supported by other devices, not by the Cam Clutch.
5. Use only a parallel key to secure the clutch to the shaft. Do not use a tapered Key.
6. When mounting the clutch onto the shaft, apply pressure to the inner race but never to the outer race.
7. Ambient temperature range is 5° to 40°C.
8. Key to be used should be in accordance with ISOR773. (DIN 6885.1)

 

Model	Capacity Torque (Nm)	Torque Drag (Nm)	Overrunning (r/min)Max. Inner Race	Overrunning (r/min)Max. Outer Race	indexing Max. (cycle/min)	Bore   Size Dia (H7)	Keyway	A	B	C	PCDD	(M6)E	F	G	H-M No. of Tapped x HolesSize× Pitch	S	Weight (kg)
MZ15	186	0.20	2,200	900	150	15	5*2.3	62	68	60	58	47	25	5.5	6*M5*P0.8	10	1.4
MZ17	215	0.20	2,000	800	150	17	5*2.3	66	75	64	64	52	28	6.3	6*M5*P0.8	10	1.8
MZ20	323	0.29	1,900	700	150	20	6*2.8	67	80	65	68	55	30	7.6	6*M6*P1.0	12	2.0
MZ30-22	735	0.39	1,800	500	150	22	6*2.8	82	100	80	88	75	45	8.9	6*M8*P1.25	16	3.7
MZ30-25	735	0.39	1,800	500	150	25	8*3.3	82	100	80	88	75	45	8.9	6*M8*P1.25	16	3.7
MZ30	735	0.39	1,800	500	150	30	10*3.3	82	100	80	88	75	45	8.9	6*M8*P1.25	16	3.7
MZ35	1,080	0.49	1,700	300	150	35	10*3.3	87	110	85	95	80	50	8.7	6*M8*P1.25	16	4.8
MZ45-40	1,620	0.69	1,700	300	150	40	12*3.3	92	125	90	110	95	60	8.4	8*M8*P1.25	16	6.2
MZ45	1,620	0.69	1,700	300	150	45	14*3.8	92	125	90	110	95	60	8.4	8*M8*P1.25	16	6.2
MZ60-50	2,110	0.98	1,600	250	150	50	14*3.8	102	155	100	140	125	80	9.1	8*M8*P1.25	16	10.2
MZ60-55	2,110	0.98	1,600	250	150	55	16*4.3	102	155	100	140	125	80	9.1	8*M8*P1.25	16	10.2
MZ60	2,110	0.98	1,600	250	150	60	18*4.4	102	155	100	140	125	80	9.1	8*M8*P1.25	16	10.2
MZ70-65	3,040	1.27	1,300	250	150	65	18*4.4	105	175	103	162	145	95	8.6	8*M8*P1.25	16	13.2
MZ70	3,040	1.27	1,300	250	150	70	20*4.9	105	175	103	162	145	95

 
                      
 
MZ-G series one way clutches

Capacities

Model	Torque Capacity (N·m)	Max.Overrunning (r/min)		Max. Indexing (cycle/min)	Drag Torque (N·m)
		Inner Race	Outer Race
MZ15G	186	2,200	900	150	0.20
MZ17G	215	2,000	800	150	0.20
MZ20G	323	1,900	700	150	0.29
MZ30G-22	735	1800	500	150	0.39
MZ30G-25
MZ30G
MZ35G	1,080	1,700	300	150	0.49
MZ45G-40MZ45G	1620	1700	300	150	0.69
MZ60G-50
MZ60G-55	2110	1600	250	150	0.98
MZ60G
MZ70G-65	3040	1300	250	150	1.27
MZ70G

 
Dimensions

Bore size			A	C	B (h7)	F	E	K	PCD D	S	H-M No.of Tapped Holes ×Size ×Pitch	Weight (kg)
Dia.  (H7)	Keyway	Chamfer  J
15	5×2.3	0.8	55	53	68	25	47	1.3	58	10	6-M5×0.8	1.3
17	5×2.3	0.8	63	61	75	28	52	1.3	64	10	6-M5×0.8	1.7
20	5×2.3	0.8	64	62	80	30	55	1.3	68	12	6-M6×1.0	1.9
22	8×3.3	1.0	70	68	100	45	75	1.3	88	16	6-M8×1.25	3.2
25	8×3.3	1.0
30	10×3.3	1.0
35	10×3.3	1.0	78	76	110	50	80	1.3	95	16	6-M8×1.25	4.4
40	12×3.3	1.3	87	85	125	60	95	1.3	110	16	8-M8×1.25	6.2
45	12×3.3	1.3
50	14×3.8	1.5	90	88	155	80	125	1.3	140	16	8-M8×1.25	9.5
55	16×4.3	1.5
60	18×4.4	1.5
65	18×4.4	1.8	105	103	175	95	145	1.3	162	16	8-M8×1.25	13.1
70	20×4.9	1.8

 
 

Changzhou RenBen Bearing Factory, is a manufacturer specialized in Producing almost all type of One Way Bearings, One Way Clutch, Cam Clutch,Backstop, Overrunning Clutch, Needle Roller Bearings. Our core business activity is the design and production of drive elements for mechanical engineering ...[Read More]

Company Profile:

• Main Product:

  One Way Clutch Bearings,overrunning clutch,cam clutch,sprag clutch,Backstop,undirectional clutch

• Business Type:

  Manufacturer

• Current Export Market:

  North America, South America, Western Europe, Eastern Europe, Eastern Asia, Southeast Asia, Mid East, Africa, Oceania

• Total Annual Sales:

  Less than USD 100,000

Factory Profile:

• Number of Employees:

  51 - 100 People

• Shift:

  2

• Size of Factory In Square Meters:

  4500

• Years of OEM Experiences:

  12

• Certification:

  ISO 9001

• Equipment Name:

  Punching machine, Gringding machine, Wire-electrode cuting machine, Testing equipment

Research & Development:

• Capability for Synchronized Development:

  Develop according to drawing or samples provided by clients?Yes

  Develop 3-D model and prototype according to client's needs?Yes

• Lead Time for New Product Development:

  45 days

• Tooling Design:

  Design Internally, Outsourcing or Cooperation

• Source of Tooling:

  Made Internally, Outsourcing

• Software/Profile:

  Pro/E