Aristo fast motor flush, frees sticky valves, lifters and rings, allows oil to flow freely to all parts of engine
Due to todays longer oil change intervals, there is an increased build-up of sludge, gums and varnishes inside the engine. It is extremely important that the engine be cleaned out thoroughly before installing fresh motor oil.
ARISTO FAST MOTOR FLUSH:
* Frees sticky valves, lifters and rings.
* Allows oil to flow freely to all parts of the engine
* Should be used at least twice a year or every 5,000-6,000 miles at time of oil change
* Recommended for use prior to engine overhaul.
Application:
1. Use Arito Fast Motor Flush just before changing oil.
2. Turn of engine and check oil level to make certain that oil is near full mark. Leave old oil filter in place during cleaning.
3. Add one can Fast Motor Flush to oil in crankcase. Replace oil filter cap, start engine and run at normal idle for approximately five minutes. Do not drive vehicle or race engine until crankcase has been drained and fresh motor oil installed.
4. Shut off engine and drain crankcase immediately. Replace drain plug and install new oil filter.
5. Refill crankcase with fresh motor oil. Start engine and allow to idle for a few minutes to assure proper circulation of new oil to all vital parts.
Related Product Tags:
automatic cleaning , brake fluid , buffer pad , Buffing Pad , car care product , car cleaning , car cleaning glove , car cleaning towel , Car Humidifier , Car paint , car polisher , Car Protector , automatic car wash , car wash brush , car wash cloth , car washing systems , car wash pad , car wash sponge