Quick Details

• External Teeth:

  9

• Internal Teeth:

  9

• Diameter :

  9inch

• Hight:

  9inch

• Seal Diameter:

  9inch

• Place of Origin:

  CHINA

• Samples:

  Free

• Delivery Time:

  9

• Packing:

  Normal

• Delivery Port:

  S

• Max. Production Capacity:

  90000

• Export Ratio:

  41% - 50%

• OE Experience:

  No

Product Name:CV Boot Joint Remover Separator Splitter Puller Propshaft Transmission AT655

CV Boot Joint Remover Separator Splitter Puller Propshaft Transmission AT655

Application

TOYOTA HONDA VW FORD RENAULT NISSAN BMW

Product Description:

CV Boot Joint Remover Separator Splitter Puller Propshaft Transmission AT655

How to remove a CV joint from a drive shaft 22 Sep 2012, 10:19

Removing a CV joint from a drive shaft can be an annoying task, especially when the shaft is not dismantled. With the new joint puller from SPIDAN the joint can be loosened without using a hammer, ensuring easy removal from the drive shaft. This also means the drive shaft can remain in the vehicle while replacing the joint.

HINT! If possible, try to wedge the joint puller behind a bulge on the axle so that the device cannot be displaced.

How to use it

After removing the drive shaft from the steering knuckle, attach the joint puller to the drive shaft. Make sure a sufficiently large area is left free on the bolt threads so that the joint can be loosened from the safeguard and the nut does not stick to the keyway. Now tighten the mounting bolt.

Subsequently tighten the joint nut on the bolt thread it is recommended to attach a suitable washer behind the nut. As soon as you have fastened a socket to the nut, move the nut with the impact driver. If you see that the CV drive joint moves on the drive shaft, the joint has loosened from the safeguard. Remove the nut and the washer(s) you might have used from the joint before detaching the joint puller and manually removing the joint from the drive shaft.

DewinAuto Limited was founded in 1996 located in Xingtai City,Hebei Province,China.We was once a State-owned Enterprise, and With reshuffle of the enterprises, We became a private enterprise in 2007. And then we change our name and made our sell office in Beijing, and expected to say “Beijing Qing ...[Read More]

Company Profile:

• Main Product:

  Steering Parts, Cover Parts, Sensors

• Business Type:

  Manufacturer

• Current Export Market:

  North America, South America, Western Europe, Eastern Europe, Eastern Asia, Southeast Asia, Mid East, Africa, Oceania

• Total Annual Sales:

  USD 1,000,001 - 2,000,000

Factory Profile:

• Number of Employees:

  51 - 100 People