Quick Details

• Supply Ability:

  6000 Set/Sets per Month

• Delivery Details:

  1-3 DAYS FOR EX-STOCKS,30-45 DAYS FOR PRODUCTION

• Packing:

  TPK OR ACCORDING WITH YOUR REQUIRMENTS

• Delivery Port:

  guangzhou

• OE Experience:

  No

Product Name:2W1709, 3306, 3306PC, 3306DI engine piston ring set

2W1709, 3306, 3306PC, 3306DI engine piston ring set

Application

all

Product Description:

 Product Description

1: Specification For TPK Piston Ring

1: Cylinder block, cylinder head, crankshaft, camshaft, connecting rod.
2: Liner Kits. Piston kits, piston ring set, cylinder liner (sleeve), Pin bush.
3: Full gasket kit, head gasket,Oil Seal.
4: Engine bearing, Main bearing, con rod bearing,Camshaft Bearing,thrust washer
5: Engine valve, valve seat, valve guide.
6: Oil Pump, water pump,
7: Starter, alternator
8: Turbocharger

3024,3044,3046,3054,3056, 3064, 3066, 3176, 3114, 3116, 3204, 3208, 3126,
3304,3304PC,3304DI, 3306,3306PC,3306DI, 3406, 3408, 3412, 3508, 3512, 3516,
C2.2, C4.2,C4.4 C6.4 C6.6, C7, C9, C10, C12, C15, C18,
D315,D318,D330,D333,D343,D346,D348,D349,D353,D9H,D8,D8H,D8K,G3300,G3406,G3412,G353

Other Piston ring for 

2:PARTS SHOW

3:FACTORY WORKSHOP AND INTRODUCTION

3306 / 10.5L 6

Diesel
Cylinder
638 CID Stroke
Bore 4.750
6.000
CYLINDER KIT

6 PLG8N3180 Cylinder kit 4.750 bore, 1.500 pin, PC, straight rod, 17.5:1 CR, [8N3180 piston, 9S3068 rings, 7N9804 pin, 9H4015
retainers, 1105800 liner] [Can use PLG8N3182]
6 PLG8N3182 Cylinder kit 4.750 bore, 1.500 pin, PC, straight rod, 17.5:1 CR, [8N3182 piston, 9S3068 rings, 7N9804 pin, 9H4015
retainers, 1105800 liner]
6 PLG8N3184 Cylinder kit 4.750 bore, 1.500 pin, PC,straight rod, 21:1 CR [8N3184 piston, 9S3068 rings, 7N9804 pin, 9H4015
retainers, 1105800 liner]
6 PLG9N5250 Cylinder kit 4.750 bore, 1.700 pin, PC,straight rod, 17.5:1 CR, with plug [9N5250 piston, 9S3068 rings, 7N9805 pin,
1S9543 retainers, 1105800 liner]
6 PLG9N5403 Cylinder kit 4.750 bore, 1.700 pin, PC, straight rod, 17.5:1 CR, with plug [9N5403 piston, 2W1709 rings, 7N9805
pin, 1S9543 retainers, 1105800 liner]
6 PLG1290358 Cylinder kit 4.750 bore, 1.700 pin, DI, taper rod, 15:1 CR [1290358 piston, 2W6091 rings, 7N9805 pin, 1S9543
retainers, 1105800 liner]
6 PLG1654262 Cylinder kit 4.750 bore, 1.700 pin, DI, taper rod, 15:1 CR [1654262 piston, 2114321 rings, 7N9805 pin, 1S9543
retainers, 1105800 liner] (replaces PLG1290338, PLG8N3102)
Caution: use casting# from crown, not skirt or bottom
6 PLG1684531 Cylinder kit 4.750 bore, 1.700 pin, DI, taper rod, 16:1 CR [1684531 piston, 2114321 rings, 7N9805 pin,
1S9543retainers, 1105800 liner] (replaces PLG1568262, PLG9Y8271)
6 PLG1646560 Cylinder kit 4.750 bore, 1.700 Pin, DI,taper rod, 16:1 CR [1646560 piston, 3300RS3 rings, 7N9805 pin, 1S9543
retainers, 1105800 liner]
6 PLG1548087 Cylinder kit 4.750 bore, 1.700 pin, DI, taper rod, 17:1 CR [1548087 piston, 2114321 rings, 7N9805 pin, 1S9543
retainers, 1105800 liner] (replaces PLG6I2650)
3306C ATAAC Truck engine 7RJ (1991) sn
6 PLG1073565 Cylinder kit 4.750 bore, 1.700 pin, DI, taper rod, 17:1 CR [1073565 piston, 3300RS2 rings, 7N9805 pin, 1S9543
retainers,1105800 liner]
3306C ATAAC Truck engine 9TL (1993) sn;Caution: use casting# from crown, not skirt or bottom
6 8N3180 Piston 4.7500 bore, PC, single-ni, 17.5:1 CR (can use 8N3182)
6 8N3182 Piston 4.7500 bore, PC, dual-ni, 17.5:1 CR
6 8N3184 Piston 4.7500 bore, PC, dual-ni, high altitude: 21:1 CR
6 9N5250 Piston 4.7500 bore, PC, dual-ni, with heat plug, 17.5:1 CR (rect comp rings)
6 9N5403 Piston 4.7500 bore, PC, dual-ni, with heat plug, 17.5:1 CR (key comp rings)
6 1290358 Piston 4.7500 bore, DI, dual-ni, 15:1 CR (rect comp rings) (replaces 1W6757)
6 1654262 Piston 4.7500 bore, DI, dual-ni, 15:1 CR (key comp rings) (replaces 1290338, 8N3102)
6 1684531 Piston 4.7500 bore, DI, dual-ni, 16:1 CR (key comp rings) (replaces 1568262, 9Y8217)
6 1290359 Piston 4.7500 bore, DI, 16:1 CR (rect comp rings) (replaces 4P8132) [will be 1646560]
6 1548087 Piston 4.7500 bore, DI, 17:1 CR (key comp rings, 4mm oil ring) (replaces 6I2650)
6 1073565 Piston 4.7500 bore, DI, 17:1 CR, 1 valve rlf, (key comp, reverse twist intermediate)
6 1290360 Piston 4.7500 bore, DI, 15:1 CR (3300RS3 ring set) (replaces 6I3650)
Unique to 330/330L Excavators
6 1568263 Piston 4.7500 bore, DI, 16:1 CR (3300RS4 ring set) (replaces 1050185)
6 9S3068 Ring set 4.7500 bore; 2 rectangular compression, .218 oil (9S3029, 5S6750, 9S7788)
6 2W6091 Ring set 4.7500 bore; 2 rectangular compression, .125 oil (9S3029, 5S6750, 7E6047)
6 2W1709 Ring set 4.7500 bore; 2 keystone compression, .125 oil (2W1707, 2W1708. 7E6047)
6 2114321 Ring set 4.7500 bore, 1 keystone comp, 1 keystone inside bevel comp, 4mm oil (replaces 3300RS1)
6 3300RS2 Ring set 4.7500 bore; 2 keystone comp, reverse twist intermediate, 4mm oil (1006695, 1006694, 6I0497)
6 3300RS3 Ring set 4.7500 bore; 1 keystone comp, 1 rectangular comp, .125 oil (2W1707, 5S6750, 7E6047)
6 3300RS4 Ring set 4.7500 bore; 1 keystone comp, 1 rectangular comp, 4mm oil (2W1707, 5S6750, 6I0497)
6 7N9804 Piston pin 1.500 dia, 3.735 length
6 7N9805 Piston pin 1.700 dia, 3.730 length
12 9H4015 Retainer piston pin use with 1.500 dia pin
12 1S9543 Retainer piston pin use with 1.700 dia pin

6 1105800 Cylinder liner 4.7500 bore, uses 5P8768 liner oring kit (Liner only) [repl 2P8889]
6 5P8768 Cylinder liner oring kit (3) 5S6670, (1) 2W6134
18 5S6670 Cylinder liner oring Lower seal
6 2W6134 Cylinder liner oring Upper filler band
BEARINGS
7 4W5738 Bearing main pair Std, 3.5000 journal, 3.8160 housing bore, 1.130 length (replaces 8N8224)
7 8N8225 Bearing main pair .010
7 8N8226 Bearing main pair .020
7 8N8227 Bearing main pair .030
7 2531APA 40 Bearing main pair .040
7 2531APA 50 Bearing main pair .050
2 6N8940 Thrust plate .185 thick (replaces 6N4129)
2 9S3037 Thrust plate .232 thick (replaces 6N4129)
2 1003652 Thrust plate .214 thick (replaces 7N9342)
6 4W5739 Bearing rod pair Std, 3.0000 journal, 3.2500 housing bore, 1.504 length (replaces 8N8220)
6 8N8221 Bearing rod pair .010
6 8N8222 Bearing rod pair .020
6 8N8223 Bearing rod pair .030
4 7M4046 Bearing cam 1.008 OAL
1 9M5477 Bearing cam 1.135 OAL
6 8N0702 Bushing con rod 1.500 pin, 1.388 OAL, straight
6 8N1985 Bushing con rod 1.500 pin, tapered
6 8N0703 Bushing con rod 1.700 pin, 1.430 OAL, straight
6 8N1849 Bushing con rod 1.700 pin, tapered
GASKET & SEALS
GASKET NOTE For gasket sets: Call with Serial and Arrangement Numbers
1 8S1605 Gasket valve cover
1 1694200 Gasket oil pan 41" length [repl 12903357, 4M2969]
1 8S1965 Gasket oil pan Spacer plate gasket, 22" length [New# 1694199]
1 9Y9895 Seal crankshaft front 2.625 shaft, 3.700 OD
1 2P3859 Sleeve crankshaft Front, 2.502 shaft, 2.627 effective shaft
1 9S3111 Seal crankshaft rear 6.328 shaft, 7.336 OD, lip type seal
1 2P3858 Sleeve crankshaft Rear, use with 9S3111 seal, 6.206 shaft, 6.328 effective shaft
1 4W0452 Seal crankshaft rear 6.198 shaft, 7.336 OD, directional type, late
1 7C4297 Seal crankshaft rear 6.202 shaft, 7.336 OD, directional type seal, late, double lip (4W0452 single lip)
CAMSHAFT
1 7E9980 Camshaft [repl 5S3972, 7C3863, 7C3864, 8N3981] [4P2942, 9Y1722 cam kit]
1 7E7261 Camshaft [OEM] Call for price and availability of remanufactured
1 1073144 Camshaft [OEM] Call for price and availability of remanufactured
12 7S3161 Lifter Solid type
VALVE TRAIN
CYLHEAD NOTE For complete and bare cylinder heads - Refer to Cylinder Head Catalog or Call with casting
6 6N9915 Valve intake 2.020 head dia, 5.369 length, .3717 stem, 30 deg, 2G (CAN USE 1007860)
DI: Natural
6 1007860 Valve intake 2.020 head dia, 5.350 length, .3717 stem, 30 deg, 2G, stellite (replaces: 6N9915, 2W2620, 7N0572)
DI: Turbo & Natural
6 5S6452 Valve intake 2.020 head dia, 5.510 length, .3717 stem, 30 deg, 2G
IDI: Natural
6 2W2621 Valve intake 2.020 head dia, 5.510 length, .3717 stem, 30 deg, 2G, Stellite (replaces 4W1670, 7S8809, 9N6117)
IDI: Turbo, Spark ignited short
6 7W7490 Valve intake 2.020 head dia, 6.437 length, .3717 stem, 30 deg, 2G
Spark ignited long

6 7N0573 Valve exhaust 1.896 head dia, 5.308 length, .3717 stem, 30 deg, 2G (CAN USE 1487455)
DI: Natural
6 1487455 Valve exhaust 1.896 head dia, 5.285 length, .3717 stem, 30 deg, 2G, stellite (replaces 1007861, 6N9916, 7N0573)
DI: Turbo & Natural
6 5S6449 Valve exhaust 1.896 head, 5.469 length, 0.3717 stem, 30 deg, 2G [can use 8N0875]
IDI: Natural
6 8N0875 Valve exhaust 1.896 head dia, 5.469 length, 0.3717 stem dia, 30 degree, 2G, stellite [repl 7S6767]
IDI: Turbo, Natural
6 2W2877 Valve exhaust 1.896 head dia, 5.469 length, .3717 stem, 30 deg, 2G
Spark ignited short
6 7W7491 Valve exhaust 1.896 head dia, 6.396 length, .3717 stem, 30 deg, 2G
Spark ignited long
12 1621589 Valve guide 0.3741 ID, 0.6583 OD, 2.781 length (repl: 1487425, 1487502, 1167553, 1090390, 1033298, 2P1262,
5S4598)
12 4W9176 Valve guide 0.3750 ID, 0.6580 OD, 2.775 length (replaces: 7N4310) Natural gas, short valve engine
12 7E1551 Valve guide 0.3750 ID, 0.6580 OD, 2.640 length; Natural gas, short valve engine, improved cooling
12 9Y7895 Valve guide 0.3750 ID, 0.6580 OD, 3.700 length; Natural gas, long valve engine
24 2A4429 Valve lock 0.372 stem dia, 2G, 7 degree
12 7S7144 Valve spring 1.373 OD, .185 wire dia, 2.085 free
12 1W5300 Rotocap Includes 6N7174 shield
12 1031800 Rotator without shield [repl 8N7782, 5S5874]
CRANKSHAFT
1 4N7693 Crankshaft [2W7458] Flange: Flat, 9 bolt holes; Snout: Tapered, 1 keyway, 1 bolt hole
1 1678123 Vibration damper
CONNECTING ROD
6 0R0915 Connecting rod Reman, 1.50 pin tapered; cast# 8N1720, part# 8N1984; bushing 8N1985
6 5S6360X Connecting rod Reman, 1.50 pin straight; cast# 2P0933, 6N8068; part# 8N1984; bushing 8N0702
6 0R0914 Connecting rod Reman, 1.70 pin tapered; cast# 8N1720, part# 8N1721; bushing 8N1849
6 5S2793X Connecting rod Reman, 1.75 pin straight; cast# 2P0933, 6N8068; part# 8N1721; bushing 8N0703
12 1P9956 Bolt connecting rod
12 5S6348 Nut connecting rod
FUEL /

Packing:

1: TPK packing

2: acording with your requirments

Shipping

(1): By sea

(2): By air 

(3): By express (DHL, FEDEX, TNT, EMS... )

1: 24 hours Onliner service

2: repying your inquiry list in 8 hours by email

Payment

(1): TT (30 %  in Advanced, 70 % before Shipment)
(2): Western Union
(3): Cash

Related Parts

         Piston Kit, cylinder liner, gasket set, other engine parts

Guangzhou TPK Diesel Parts Co.,Ltd, Build in 1996, is a professional  manufacturer on Diesel Piston, Piston ring, Cylinder Liner, Head Gasket & Overhaul Gasket Kit. TPK has been cooperating with OEM factory in China for several years, running business mainly in imported diesel engines . All products in TPK have passed the national quality supervision on combustion engines and obtained certificates from ISO9002.

Till now, TPK has four storehouses in Guangzhou, occupying an area of over 5,000 square meters. The number of employees in TPK reaches up to 100, among which include 20 sales personnel in China, 15 sales personnel outside China, 10 QC personnel. TPK products command a ready market in Europe, Middle East, South America, North America, and Southeast Asia and are well received.

With the principles of international brand, good quality, shared resources, and serving the world, TPK endeavors to provide perfect accessories replacement solutions for customers. TPK is ready to cooperte with you to reach a win-win future.

Founded in 1996, Guangzhou TPK Diesel Parts Co., Ltd is a professional manufacturer of diesel piston, piston ring, cylinder liner, head gasket & overhaul gasket kit. We have been cooperated with OEM factories in China for several years, running busine[Read More]

Company Profile:

• Main Product:

  Piston Ring, Piston, Gasket Kit, Cylinder Liner, Engine Parts

• Business Type:

  Trading Company