Quick Details

• Place of Origin:

  Shanghai China (Mainland)

• Brand Name:

  Oliimy

• Model Number:

  RX-T15083001

• Position:

  Rear Bumper

• Material:

  Fiberglass / FRP

• Car Make:

  Any cars

• OE NO.:

  According to your requests

• Size:

  According to your requests

• Material:

  Fiberglass and resin

• Technique:

  Hand lay up process

• Surface:

  Painted or gel coat surface

• Gloss:

  Over 80 for gel coat surface

• Color:

  According to your requests

• Size:

  According to your requests

• Capacity:

  One piece from one mould per day, more moulds to enlarge capacity

• Advantages:

  Low moud cost

• MOQ:

  No special MOQ

• Place of Origin:

  Shanghai China (Mainland)

• Packing:

  Fiberglass Waste Receptacle finished with gel coat surface plastic bubble paper, carton, wooden shelf

• Delivery Port:

  any port in China

• OE Experience:

  No

Product Name:Fiberglass Waste Receptacle finished with gel coat surface

Fiberglass Waste Receptacle finished with gel coat surface

Application

Auto parts,auto accessories,auto body

Product Description:

With 10 years' experience in fiberglass products, we have three main process to produce fiberglass parts: hand lay up, SMC(Sheet Moulding Compression) and RTM (Resin Transfer Molding). Now our products are exported to many countries like America, Canada, UK, Spanish, Netherlands, Australia, New zealand, Japan, Korea etc.

Most of our products are customized according to customers' design or sample, please feel free to contact me and send me your drawings for cost evaluation, 3D drawings in stp or x_t format can be used for us.

Procedure for Hand lay up process                           

	Mould treatment:  Polish: Moulds must be polished before production. This will guarantee the good and solidified surface Clean: Special detergent are used to get the dust away from the mould. This will make no dark markings in the gel coat surface.  Release agent: This will be brushed on the mould to make demoulding easily.
	Fiberglass and resin: Gel coat: The color is decided by the gel coat,with thickness of about 0.3-0.5mm. UV resistant can be added.  Surface mat:  This is to avoid the air bubble on the surface, and also make fiberglass mat  invisible from the finished surface.  Fiberglass mat: Normally we use 300g/m2 (0.6mm thickness) and 450g/m2 (0.9mm thickness). Accordig to your requests on the thickness and strength,we will calculate how many layers of fiberglass mat should be used.
	Demould and trim: Solidify:  The time required for solidifying depends on thickness and weather condition.Normally 24 hours for one piece to solidify to avoid any deformation after demoulding.  Demould: After solidified, the product will be demoulded Cut and trim:  We will mark the trim line and hole positions on the mould,then trim according to the marks to gaurantee the mounting dimensions
	Air bubble test and repair  Air bubble test: Every piece will be put into the oven under 44 celsius degree for about 20 minutes,so that the air bubbles can break out then our workers will repair the surface.  Repair and surface treatment: we will make the air bubble repaired and treat the surface with average gloss.

 Quality Control: surface checking                             

Why choose us                                                           

Shanghai Olimy Co.,Ltd. is a reliable supplier for Auto Parts. Our main products cover Fiberglass Reinforced Plastic Products(FRP),Coolant Rubber Hose,Silicon Rubber Hose,Oil Level Gauge and Oil level Gauge Pipe. We have 4 factories who specially design and produce above different products. With ...[Read More]

Company Profile:

• Main Product:

  Pipe