SX-G6
Basic Functions:
Parameters measurement such as camber, Caster, Kingpin inclination, Toe-in & Toe-out
Features:
1. 3D cameras alignment based on the car and not influenced by the platform.
2. Measurement system equipped with double digital cameras and four target disk, supplying revolutionary measurement mode.
3. There is no electronic component, so the wheel alignment will not have a component failure problem.
4. Equipment Calibration - once calibration before delivery, workable immediately after installation, no need for periodic calibration
5. Measurement progress no need to compensate for steel ring, the precise eccentric compensation will be just once pulling or pushing the car back and forth
6. Software system Easy to operate, complete conventional basic parameters within two minutes, significantly faster than conventional aligners
7. Easily maintenance, download and upgrade freely for the model data
Measurement project |
Accuracy | Measurement range |
Display accuracy | 1´/1mm | |
Camber | ±2´ | ±10° |
Caster | ±6´ | ±20° |
Kingpin Inclination | ±6´ | ±20° |
Toe-in & Toe-out | ±2´ | ±20° |
Set back | ±2´ | ±5° |
Thrust angle | ±2´ | ±5° |
Wheel Deviation | ±2mm | |
Axis Deviation | ±2mm |
Related Product Tags:
turbocharger balancing machine , balancing machine , battery tester , bench , body bench , body repair bench , repair bench , testing bench , auto bench , brake tester , Clutch Tester , common rail system , common rail test stand , common rail test bench , common rail tester , diesel fuel pump , diesel test bench , four wheel aligner