Multi Tool OBD2 CAS KEY PROGRAMMER for BMW car keys
Warning: Make sure connect dongle to compute before run the software.
for BMW Multi Tool+ KEY PROGRAMMER latest software V4.1
Powerful than AK300!!!
for BMW Multi Tool+ KEY PROGRAMMER includes forth parts:
hardware device, dongle, programmer, software. Before running software you
must connect dongle and hardware device to computer.
for BMW Multi Tool+ KEY PROGRAMMER Description:
1. OBD II CONNECTOR: Connects the tool to the vehicle's Data Link connector (DLC).
2. Dongle: USB dongle.
3. USB CONNECTOR: Connects the tool to the PC/Laptop through USB Cable.
4. Programmer: Program keys.
5. Programmer Female Pin: Connects programmer to device.
6. Programmer Male Pin: Connects programmer to device.
for BMW Multi Tool+ KEY PROGRAMMER Specifications:
1.Operating Temperature: -20 to 70 °C ( -4 to 158 °F )
2. Storage Temperature: -40 to 85 °C ( -40 to 185 °F )
3. Diagnostic Interface: 16 PIN
4. USB Interface: USB 2.0
5. Power: DC 5 V - 12 V
6. Consumption: 1 W
7. Dimensions: Length 95 mm, Width 49 mm, Height 28 mm
for BMW Multi Tool+ KEY PROGRAMMER Function:
supported function including:
1. Car access sytem dentification
2. Read/Write CAS EEPROM(OBDII)
3. Read/Write KM stored in CAS system(OBDII)
4. Read/Write synchronization codes stored in CAS system(OBDII)
5. Synchronize DME and CAS(OBDII)
6. Synchronize CAS and ELV(OBDII)
7. Prepare dealer key for CAS1/CAS2/CAS3/CAS+(support latest CAS3 verison)(OBDII)
8. Read/Restore CAS KEY information(OBDII)
9. Disable/Enable key with working key(OBDII)
10. Clear DTC and Shadow (OBDII)
11. Prepare dealer key with CAS eeprom dump
12. Unlock dealer key prepared with our software with CAS eeprom dump or KEY
information
13. Change KM in CAS and instrument dashboard with file dump
14. Have key programmer, you can programm dealer key directly.
Pay attention to the function:
Help->Device update. You can get the latest software version and firmware verion when
you can access to internet.
1. Menu:
- Tool: you can choose language here, support "English" and "Chinese Simplified"
Restart software to apply your settings.
- File Make Key: you can prepare dealer key with EWS and CAS EEPROM dump.
- Help: Device update. You can get your device and dongle id version and update it.
2. Protocal type:
Now BMT support there type of protocol: KWP-CAN BUS 100Kbps, KWP-CAN BUS 500Kbps, KWP-2000. "Auto Detect " function can help you to choose the right protocol. After
choose protocol okay, then press "Connect". If connected success. All CAS info
will display in CAS Identification. Include CAS number, VIN, production date, etc.
3. EEPROM Function:
Read EEPROM, Write EEPROM, Save File, Load File
1). You should backup the CAS EEPROM before prepare dealer key. After succeed
read EEPROM, please save it as back file. This step is very important.
2). Now can't read the whole EEPROM for cas3 system. But the main section is
contained. It should be saved. When you read CAS EEPROM, it will give tips
(Press ok to continue).
4. Odometer:
Support read and change KM stored in CAS system.
Don't support to change KM in instrument. If you want to change the KM display in
instrument. You should change KM in CAS system first. Then modify the KM in
instrument manually.
5. Synchronization Codes:
1). CAS3 code-DME, CAS3code-EGS: Read and write DME and EGS code stored in CAS3 system.
2). Synchronize DME and CAS this function will be useful while prepare dealer key
or any other operation which cause can't start the engine.
3). Synchronize CAS and ELV this function can help clear wheel errors
6. Key Learn Function introduction:
1). Get Key Info: With this function you can get the key cutting, remote frequency,
and key data.
2). Save Key Info: Save the read key info.
3). Load Key Info: Load the saved key info. To see the key data and prepare for
write key info.
4). Write Key Info: Write the loaded key info into CAS system.
5). Make Dealer Key: You can prepare dealer key after you get key info successfully.
Also you should choose the key position.
6). Add key: Add the new dealer key into CAS system. Some CAS system needs
this
Related Product Tags:
adaptor , adaptors , auto adaptor , auto adaptor asm , Cigarette Lighter Adaptor , tv adaptor , airbag reset , airbag resetting , vag airbag reset tool , srs airbag reset , airbag reset tool , oil light airbag reset tool , mb airbag reset tool , airbag reseter , analyze , Battery Detector , Beepro Programmer , boost