Quick Details

Product Name:Cleaning System.Stencil Cleaner,PCBA Cleaning System,CW-800

Cleaning System.Stencil Cleaner,PCBA Cleaning System,CW-800

Product Description:

OEM No/Model: CW-800
 

Cleaning system.Stencil Cleaner,PCBA Cleaning System,CW-800 :
1.Quick & super clean effect: SMT steel mesh, copper mesh, resin mesh, screen, PCB misprinting board and PCBA board, can quickly and effectively clean the surface after printing to the residual solder paste, red plastic and other pollutants;
2.Standard water-based automatic cleaning mode: In a cleaning room to complete the cleaning, rinsing, drying all the cleaning process, small size, compact structure;
3.Full Process Visualization: The cleaning room is equipped with a visual window, the cleaning process at a glance;
4. Wide range of applications: SMT stencil, screen, India plastic governance, SMT scraper, large size PCBA, Misprint plate;
5.DI water real-time resistivity cleanliness monitoring system:Used to monitor the cleaning effect, the resistivity can be set, resistivity control range 0 ~ 18M;
6.Nozzle pressure adjustable and symmetrical design: To solve the SMT steel mesh in the cleaning process by high pressure spray conditions under the tension problem;
7.Standard cleaning tank heating system: Water-based process on the needs of heating emulsification, greatly improving the cleaning efficiency, shorten the cleaning time;
8.Low operating costs:
Built-in filter device can be used to achieve the recycling of solvents to extend the pollutant load saturation time, at the end of the cleaning using compressed air recovery pipeline and the pump within the residual chemical solution, can effectively save 50% cleaning agent;
9.Can be cleaned oversize size PCBA 800mmx800mm)
10.High pressure fan + four wind knife wind cut dry: Using 5.5HP high pressure fan, more efficient (3 to 5 minutes), more thoroughly!
11.Full Chinese large touch screen interface:Color touch screen, PCL control, according to the program run; can set the solution temperature, cleaning time, rinse times / time, rinse temperature, drying time, drying temperature, conductivity monitoring and other parameters.
Ultrasonic Cleaner SMT Cleaning Machine,Automatic Stencile Cleaner,CW-800

1. 
   Applicable screen size: maximum 750(L) ×750(W) × 40(H)mm  Special size should be customized 
2. Liquid tank capacity 50L* 2PCS
3. Cleaning method Steel net reciprocating movement, cleaning liquid high pressure liquid jet
4. Rinse method: Open loop DI water or closed-loop chemical spray
5. Drying method: Four wind knife wind cut dry
6. Cleaning time: 2-5mins
7. Cleaning isolation time: 1min
8. Rinse time: 2-5 mins
9. Rinse Drying time: 3-5 mins
10. Resistivity tester range: 0--18M
11. Liquid heating temperature: Room temperature 60
12. Liquid tank heater power(KW) 9KW
13. Rinse tank heater power(KW):       9KW
14. noise: Less than 65 decibels
15. Drying temperature: Room temperature --90
16. Drying heater power KW 9KW
17. The total power is about: 33KW Normal working power 3-6KW
18. Chemical liquid level filter: 0.45μm
19. DI water filter: 0.45μm
20.  DI water supply: 30~60L/min
21.  DI water pressure: 0.4mpa
22.  water intake: G3/4 Inner teeth
23.  Drainage: G3/4 Inner teeth
24.  Row of chemical liquid mouth:  12 hose
25. Spray pump: 4HP Stainless steel multi - stage centrifugal pump
26. Exhaust size: 123mm
27. Power supply / gas source: AC380V  50HZ  90A  /  0.45Mpa-----0.7Mpa
28. net weight: 500Kg
29. dimension: about 1500mm(L) ×1260mm(W) × 1900mm(H)

Our Official website:
 

Established in 2004,Chuangwei Electronic Equipment Manufactory( HongKong & DongGuan ) is a professional manufacturer and exporter that is concerned with the design ,development and production of pcb depaneling machine ,pcb separator ,pcb cutting machine ,pcb/fpc robotic soldering machine ,hot bar ...[Read More]

Company Profile:

• Main Product:

  Pcb separator,Pcb Cutting Machine,Pcb Router machine,Pcb Fpc Soldering and other SMT Equipment

• Business Type:

  Manufacturer

• Current Export Market:

  North America, South America, Western Europe, Eastern Europe, Eastern Asia, Southeast Asia, Mid East, Africa, Oceania