OEM No/Model: CW-36
Our Official website:
1.Automatic Nozzle Cleaner,CW-36 Specifications:
Air pressure |
Air pressure | Compressed air |
Intake pressure setting | 0.50.55MPa | |
Injection pressure setting | 0.350.38MPa | |
Nozzle injection pressure | 0.4MPa | |
Consumption of gas | 260Nl/min | |
tube | Intake trachea | 12 tubes |
Drainage tank | 8tubes | |
Cleaning fluid | Cleaning fluid | Industrial deionized water |
Consumes liquid | 300cc/h(5cc/min) | |
Storage tank capacity | 1200cc | |
power supply | power supply | AC220240V |
plug | 3-Pin | |
Consume electricity | 0.1Kw | |
surroundings | Working temperature | -5 (But not frozen) |
Liquid temperature | 0 (But not frozen) | |
Working environment humidity | 1060%RH | |
Equipment placed in the environment humidity | 1060%RH | |
dust | 0.1mg/m³(There is no conductive dust) | |
Corrosive gases | Not allowed | |
other | Dimensions | 655(L) x 560(W) x 475(H) |
weight | Contains cleaning solution2000cc |
2.Pneumatic Nozzle Cleaning Machine,Nozzle Washing Machine Features:
A one-time into the 36 nozzle, please wash large;
Completely solve the dirt is difficult to clean the dirt impurities;
Though the smaller nozzle aperture but cleaning is clean;
Cleaning more thoroughly directly extend the life of the nozzle;
No damage to the surface of the nozzle coating, reflective plate;
Use environmentally friendly deionized water or distilled water to clean;
Automatic continuous cleaning, automatic drying;
Operation is more simple and convenient;
Increased intelligent water storage check function
Applicable to all kinds of placement machine.
3. Contrast with traditional cleaning
1 Artificial wind guns
Manual cleaning efficiency is low, the nozzle surface and the lumen can not be cleaned, the hole with a steel wire stabbed easily damaged;
Cleaning effect difference;
The use of cleaning fluid and alcohol may penetrate to cause the reflective layer to fall off.
before cleaning after cleaning
2 Ultrasonic cleaning
Low cost and high efficiency;
Cleaning process can easily lead to collision
between the nozzle, resulting in damage to the surface
of the black coating or fall off;
Cleaning fluid on the nozzle surface coating damage, greatly reducing the use of nozzle life;
Can not completely clean the nozzle surface and lumen;
For the latest 01005 and 0201 nozzle can not be a
good cleaning, mainly due to the nozzle hole is too small, ultrasonic cleaning can cause vacuum bubbles can not be discharged and cleaning is not clean.
Related Product Tags:
aluminium foil , automatic line machine , bandsaw blade , battery thermal protector , series battery thermal protector , tube bending machine , bending machine , blasting machine , shotblasting machine , blow molding machine , blow moulding machine , briquetting press , bucket elevator , camshaft grinding machine , CBN INSERT , chain block , chain hoist , cleaning machine