Quick Details

• Output Power:

  110kw

• Length:

  1000cm

• Width:

  1000cm

• Height:

  1500cm

• Output voltage:

  380V

• Output current:

  22A

• Place of Origin:

  China

• Delivery Time:

  75 Days

• Packing:

  Wooden

• Delivery Port:

  Shenzhen

• Max. Production Capacity:

  50 Set Monthly

• Export Ratio:

  51% - 60%

• OE Experience:

  No

Product Name:0.5 Liters Intermeshing Type Dispersion Kneader

0.5 Liters Intermeshing Type Dispersion Kneader

Application

Dongfeng

Product Description:

LINA 75 Liters Intermeshing Type Kneader Rubber Mixer with Different Rotors is one of kneader mixers rotor types and it is different with tangential rotors. Intermeshing Type Rubber Kneader Machines rotor is driven by a constant speed connecting gear, the large diameter of one rotor interacts with the small diameter of the opposite and suitable for a wide range material including high filling rubber, plastic, elastomers, ceramics and mental, and other solids, semi-solid and powder materials. To ensure the maximum dispersion effect, the specification of rotor, top and down ram is optimized, LINA Mass Production Intermeshing Rotor Rubber Dispersion Kneader is not only suitable for mix rubber and plastic materials with high-viscosity, but also semi-solids with low viscosity, a variety of elastomers, ceramic powder and a wide range of new materials such as graphene etc.
Characteristics of LINA 75L Intermeshing Type Dispersion Kneader
1. Higher cleanness: Clean up the material without dead corners; the mixing chamber and rotors can be separated completely; All surface that directly contact with the material is mirror polished, which ensure all the materials easy to clean without stickiness.
2. Wearable inner cavity: Imported special new alloy steel and Vacuum heat treatment are adopted. Strong wear resistance, resistance to horizontal erosion, corrosion resistance and high glossy finish effects are achieved.
3. Adjustable rotor speed ratio: The speed ratio of rotors is adjustable, which target at some special material function requirements and achieve best dispersion effect and efficiency. 
4. Temperature control system: A lot of trials report that stage temperature control has the essential effect of ceramics color difference. 
PLC intelligent control system: 1. Real-time data record and export of kneading time, temperature (mixing chamber and front/rear rotors), ram pressure, current, torque and recipe code. 2. The control system can be set up to 20 mixing steps, save 20 recipe spaces. 3. The control system is capable of remote importing of the process recipe and data monitoring, and communicating with MES via Ethernet communication interface. 4. An Ethernet communication interface and 20% of the control points are reserved. Touch screen is provided. 
Specifications of LINA 75 Liters Intermeshing Type Dispersion Mixer
 

Item	Specification	Remarks
Type	Intermeshing type
Mixing Capacity	75 liters
Production Yield	70-100 KG per time	Subject to the proportion of material and dispersion requirements.
Main Motor Power	110 KW
Flipping Method	Hydraulic type
Flipping Angle	140°
Temperature Control	Heating or/and cooling	Electric/oil/steam heating and circulating water cooling.
Weight	About 10800 KG
Dimensions	About 3800*2300*3200mm

LINA After-Sales Services
1. On-site installation assistance is available. (There are no charges on installation and trial running, but VISA fees, accommodation fees and transportation fees etc. of the suppliers side are charged by the buyer.)
2. Training of customer's operators and maintenance personnel and long-term technical consultation is provided.
3. One year's non-charge warranty period is provided for units in normal operation and long-term spare parts/components are available. During the warranty period, the supplier, within three hours since receipt of purchaser's notice of any equipment fault, shall provide express solution, and, if necessary, assign service engineer(s) to site across China within 72 hours or site in Pearl River Delta within 5 hours (excluding travel time). Response time for customers overseas shall be agreed upon otherwise based on application for visa and accessibility to the customer's location.
 
LINA Production Ability
 
FAQ
Are you factory or trading company?
LINA Machinery has been engaged in Rubber & Plastic mixing machine for many years. We have workshop and R&D department.
What about the operational guideline?
Training of customer's operator and maintenance personnel and long-term technical consultation is provided. 
How about the warranty time?
One year's non-charge warranty period is provided for units in normal operation and long-term spare parts/component are available.
Do you offer the customization of the machine?
Certainly, LINA will give you the most proper recommendation and setting according to your materials and demand.

We are a professional manufacturer of Rubber Kneader, Banbury Mixer, Dispersion Kneader, Internal Mixer, Rubber Open Mill, Two Roll Open Mill, Rubber Pelletizing Machine and Rubber Granulation Line. Guangdong LINA Industrial Co., Ltd. has more than 10 years of experience in R & D of rubber and ...[Read More]

Company Profile:

• Main Product:

  Kneader, Open Mill, Granulator, Pressing Machine

• Business Type:

  Manufacturer

• Current Export Market:

  South America, Eastern Asia, Southeast Asia, Mid East, Oceania

Factory Profile:

• Shift:

  3

• Size of Factory In Square Meters:

  20000

• Years of OEM Experiences:

  10

• Certification:

  ISO 9001

Research & Development:

• Capability for Synchronized Development:

  Develop according to drawing or samples provided by clients?Yes

  Develop 3-D model and prototype according to client's needs?Yes

• Lead Time for New Product Development:

  65

• Tooling Design:

  Design Internally

• Source of Tooling:

  Outsourcing

• Software/Profile:

  AUTOCAD, Catia