BMW EWS immobilizer
BMW EWS 2 and EWS 3.2 immobilizer
This device can emulate BMW EWS 2 and EWS 3.2 immobilizer (EWS module) in cases when original system restore is impossible (faulty EWS, lost or damaged transponders, continuous problems with rolling codes etc.).
1. Remove original EWS2 control unit, find +12v ACC, GND, K-line
2. Disconnect emulator from K-line, connect K output from emulator to
3. DME(DDE) <-> EWS line.
4. Don t forget to short two starter relay wires (EWS connector)!
5. Car is ready to start
BMW INPA K+D-CAN PLUS
BMW INPA / Ediabas K+DCAN USB Interface
Interface USB OBD2 for BMW - INPA/Ediabas - K+DCAN allows full diagnostic of BMW from 1998 to 2008 (all functiosn as in OMNITEC interface). Build in 2 lines K and D-Can magistral
Features
- read and delete errors
- adaptations
- driver programming
- applu coding
- and others...
Supports protocols:
1. Fast magistral D-CAN and PT-CAN (500 kbit/s)
2. Slow magistral K-CAN (100 kbit/s)
3. Standard BMW protocol (BMW OBD interface).
D-CAN for:
- E60, E61 od 03/2007
- E83 od 09/2006
- E81, E87 od 03/2007
- E90, E91, E92, E93 od 03/2007
- E70 (new model X5)
- R56 (new model MINI)
PT-CAN, K-CAN - fully switchable speed of migistral CAN - ou can diagnose driver withtou any car
Protocol "BMW OBD interface" for older cars:
- from 1995 to 1998 (don't need K-line).
- from 1998 to 03/2008 (all models)
Related Product Tags:
adaptor , adaptors , auto adaptor , auto adaptor asm , Cigarette Lighter Adaptor , tv adaptor , airbag reset , airbag resetting , vag airbag reset tool , srs airbag reset , airbag reset tool , oil light airbag reset tool , mb airbag reset tool , airbag reseter , analyze , Battery Detector , Beepro Programmer , boost