Quick Details

• Type:

  Engine Analyzer

• Place of Origin:

  China

• Samples:

  Charge

• Sample Price:

  340

• Delivery Time:

  3 Working Days For Cylinder Pressure Gauge

• Packing:

  We Use 2 Layers Packing To Make Cylinder Pressure Gauge Safe.

• Delivery Port:

  Shenzhen

• Max. Production Capacity:

  10000 Sets

• Export Ratio:

  91% - 100%

• OE Experience:

  No

Product Name:Truck Diesel Fuel Cylinder Pressure Gauge Truck Bus Diesel Engine Cylinder Pressure Gauge

Truck Diesel Fuel Cylinder Pressure Gauge Truck Bus Diesel Engine Cylinder Pressure Gauge

Application

all brands

Product Description:

  This compression tester has been completely tested at the factory for accuracy and leakage before shipment. If, at some point after usage, the tool does not hold pressure, the probable cause is foreign matter in either the release valve or the valve core in the adapter. Usually, by running an engine with the compression tester attached and holding down the side release valve, the foreign matter will be blown out. In the event that a valve core fails, replace only with a special valve core from your dealer.

Package size(cm3): 38 x 26 x11
Cylinder pressure gauge Cylinder pres
To take a compression test:

1.     Select proper adapter for the engine to be tested.The adapters are designed to replace either the glow plug or the injector on the engine.

2.     Remove the glow plug or injector from the cylinder to be tested and shut off or by pass the fuel to that cylinder.

3.     Turn the engine over for a few revolutions to blow out any carbon or foreign matter from the port area.

4.     Connect the adapter. The adapters are designed to be threaded into, or clamped into, the glow plug or injector hole in the same way the glow plug or injector is attached to the engine.The top of the adapter has a male quick disconnect to accommodate the compression tester to the adapter.

5.     With the correct adapter in place on the engine, attach the compression tester to the adapter. Make sure the locking sleeve on the quick coupler of the tester slides completely into place.

6.     Run or turn over the engine to the manufacturers specs until maximum pressure is reached, usually with 8 to 12 strokes of the engine. The reading is shown and held on the gauge. Push the side release valve to release pressure.

7.     Always check the engine manufacturers recommendations for compressions for compression testing before test.

WARNING:

Always wear eye protection during testing.
Always use care around moving engine parts.
Always check the manufacturers instructions for testing.
Always blow out any foreign matter from cylinder before testing.

Package includes kits

ULT 95003R1:VW, Volvo, Audi, Dodge, Mercedes, Cummins 5.9L(24mm x 2.0)
ULT 95003R2: GM 4.3L 6 Cyl., 4.3L and 5.7L 8 Cyl., Ford/Navistar 6.9L and . et 7.3L, International Harvester 6.9L(10mm x 1.0)

ULT 95003R3: Ford Ranger Toyo Kogyo 2.2L, Ford/Mazda 2.0L, Escort, Lynx, Tempo and / et Topaz, Nissan 2.2L, Toyota 2.2L(10mm x 1.25)
ULT 95003R4: GM 6.2L and / et 6.5L V8(10mm x 1.0)

ULT 95003R5: Mercedes, BMW 2.4L,Lincoln, Mark VII Continental, Peugot 2.0L and / et 2.3L, VW, Volvo, Audi 1.5L, 1.6L, 2.0L, 2.6L, GMC truck W4, W7,W7HV, Hino, Isuzu (12mm x 1.25)
ULT 95003R6: Mercedes, (18mm x 1.5)

ULT 95003R7: Allis Chalmers, Fiat Allix, John Deere, Ford Tractor, International Harvester, Mack Truck, Massey Ferguson, Fuso, Onan, Scania, Waukesha, Wisconsin, White, Bedford and Case. (21mm)
ULT 95003R8: Cummins injectors (dual adaptor) . Injecteurs Cummins (adaptateur double ) (7/8 & 1)

ULT 95003R9: Injectors on Detroit Diesel / Injecteurs sur moteur diesel Detroit (m24 Injector . Injecteur)
ULT 95003R10: Britich Lealand-Land Rover (14mm x 1.25)

ULT 95003R11: Case/Cummins B Series and / et Dodge 5.9L (24mm x 1.5)
ULT 95003R12: Case/Cummins C Series 8.3L (m17 Injector / Injeceur)

ULT 95003R13: Navistar DT360, DT466, 9.0L, 312, 360, 414, 436 and / et 446 C.I.D. (m17 Injector / Injecteur)

ULT 95003R14: JI Case 70, Caterpillar 3208 and 1100 and / et 500 series, 276, 404 and / et 531 C.I.D. (m17 Injector / Injecteur)

ULT 95003R15: Caterpillar D336, 1674, 1676, 3406, 3408 and / et 3412.
ULT 95003R16: 7.3 Turbo direct injector late model Ford Navistar (m21 Injector)
sure gauge Cylinder pressure gauge Cylinder pressure gauge Cylinder pressure gauge Cylinder pressure gauge Cylinder pressure gauge Cylinder pressure gauge Cylinder pressure gauge Cylinder pressure gauge

Shumatt is a professional auto goods supplier in china. Our main business including bus air conditioning parts and auto diagnostic tool. Shumatt online mall is in goautogoods ( auto air con parts supplier & auto tools seller).Your one step purchase website for all auto goods! Compressor: ...[Read More]

Company Profile:

• Main Product:

  Bus air condition parts, bus compressor, auto diagnostic tool, auto parts

• Business Type:

  Trading Company

• Current Export Market:

  North America, South America, Eastern Asia, Southeast Asia, Mid East

• Total Annual Sales:

  USD 500,001 - 1,000,000

Factory Profile:

• Number of Employees:

  Less than 50 People

• Shift:

  1

• Size of Factory In Square Meters:

  1200

• Years of OEM Experiences:

  4

Research & Development:

• Capability for Synchronized Development:

  Develop according to drawing or samples provided by clients?Yes

  Develop 3-D model and prototype according to client's needs?

• Lead Time for New Product Development:

  10 working days

• Tooling Design:

  Outsourcing or Cooperation

• Source of Tooling:

  Outsourcing

• Software/Profile:

  AUTOCAD