DigiMaster 18 is a programming machine with multifunction which can connect computer through the USB access, Odometer Correction include: BMW 7 Series E65/E66/E60/E90 (from 2001 to 4th of 2005), no need to replace M35080 (memory)Mercedes Benz W203/W220/W211 cluster and (EZS)(2000-2005) ignition module adjustingHyundai/Peugeot/Renault/Honda/Picasso (NEC CPU) cluster adjustingVolvo XC90, S80.
Description of DigiMaster 18
1. The most Cost-effective programmer. Function is power, without token, there are many Wiring diagram in it.
2. Automatic analysis, practical, immediately mileage correcton. it can analyze mileage automaticly if you put the chip well. if you don't know the car model, only just input the mileage, then you will know.
3. The only professional programmer with the Chip pin detection, the chip and data is safest. It won't happen the data lost, chip broken.
4. Professional programmer function is most power. It is most chip and cpu model programmer in the market at present.
5. Update for free without token and udpate new vehicle from NET forever.
6. Data analyze, it can help you to solve the problem of the new car by yourself soon.
7. Universal socket, all devices use this.
8. Pin test, make sure the chip well contact in the socker. Protect your chip and data.
9. Guiding operate, you will feel easy to adjust odometer.
Operation System: WINDOWS 98/ME/2000/XP/2003
Language: English, Chinese
Function
Mileage Correction, Audio Decoding, Read IMMO Code, Airbag Resetting, Sensor signal simulation, Universal Programmer.
New odometer adjustment
New Audi A4; CPU Model: Audi A6, TT, Buick GL8, Volvo S70, S80, V70, Ford Mondeo, Honda CRV, Grand Cherokee, VW Beetle, Jaguar, no longer need additional adapters
Also added various CPU airbag computer repair.
Applicable models:
Mercedes-Benz, BMW, Audi, Toyota, Honda, Mitsubishi, Nissan, Opel, VW, Hyundai, Fiat, Mazda, Skoda, Buick, Red Banner, Chery, Leopard, Chollima, HAFEI, PLKA......
Odometer Correction:
Include: BMW 7 Series E65/E66/E60/E90 (from 2001 to 4th of 2005), no need to replace M35080 (memory)Mercedes Benz W203/W220/W211 cluster and (EZS)(2000-2005) ignition module adjustingHyundai/Peugeot/Renault/Honda/Picasso (NEC CPU) cluster adjustingVolvo XC90, S80
Description:
DigiMaster 18 is a programming machine with multifunction which can connect computer through the USB access. Apart from the ordinary functions, there are special models function:
1. Maintenance of the odometer: It is for correcting the mileage of the odometer (identify the data stored in the chip and analyze the data rule of them automatically). Repair the problem of the odometer & Coding the new odometer .
2. Universal Programmer: used when program and modify on the EEPROM with no more than 16 architraves.
3. Decoding Audio: this function module is designed for all kinds of audio with digital code. You can decode the original code when the original code is missed.
4. Restore the airbag: this function module is designed for restoring the data of the airbag after the traffic accident.
5. Computer decoding: used to read the immobilizer of VW/ Audi.
6. Signal generator: used to generate signal in different frequency of all kinds of sensors ( photoelectricity sensor; magnetoelectricity sensor, hall sensor etc. ), simulation test for the odograph and ECU.
Fool-proof operation
With graphical and induced operation user display, you can learn it even without the help of the manipulation manual. Just like WINDOWS, it supplies a lot of tips and on-line service. It can find out corresponding type automatically if only enter the type of manufacturer, so it is no need to waste any time in the list of products.
Omnipotent drive for the architrave
Every architrave is not only can supple with VCC, VPP or GND but also TTL high/low voltage, high-speed timepiece and three conditions. Thus, it can program on all DIP devices with no more than 16 architraves without adapter. So, it's not only can program on those DIP devices which exist in market at present but also can meet the need of the new device with no more than 16 architraves in the future.
The check function of inserting and contacting
DigiMaster 18 carry an inserting and contacting inspection on every parts of an apparatus which can prevent you from programming under the bad-contact and wrong position thus damage can be prevented.
Notice:
1. When use the module of signal generator, need to install signal output adapter and use appropriative signal output equipment.
2. Please pay attention to distinguish 5V and 12V output voltages and the type of signal. DC signal apply to analog photoelectricity and Hall sensor signal; AC signal apply to analog magnetoelectricity sensor signal.
Packing List
-DM 18
-Data Cable
-Burn-in Socket
-User Manual
-Software CD
Note: We can send out package via DHL,Fedex, UPS, EMS, HONGKONG POST, etc. We can send out pacakge according to customers' request, usually use DHL door to door service, if need change, please inform our sales, thanks.
Related Product Tags:
turbocharger balancing machine , balancing machine , battery tester , bench , body bench , body repair bench , repair bench , testing bench , auto bench , brake tester , Clutch Tester , common rail system , common rail test stand , common rail test bench , common rail tester , diesel fuel pump , diesel test bench , four wheel aligner