OEM No/Model: AP08
Designed for extending the range of 2.4 GHz wireless radio devices, the booster is particularly effective when used with direct sequence or frequency hopping spread spectrum radio modems. The unit provides the transmit power amplification as well as receive signal gain. The built-in dynamic power sensor in PA adjusts the Radio Frequency (RF) power output level by reading the input signal power. This Automatic Gain Control (AGC) Technology effectively making the RF amplifiers delivers the maximum output power at various input levels while keeping the distortion at a minimum.Ideal for increasing the range of low power radio devices and to compensate for cable loss in certain installations. 2.4 GHz, 802.11b/G, Technical Specifications Operating Range: 2400 - 2480 MHz Operating Mode: Bi-directional, TDD Transmit Gain: 19 dB Frequency Response: ± 1 dB Output Power: 1 Watt (+30 dBm) TX Input Power: 5 dBm min, 20 dBm max Receiver Gain: 18 dB typical Noise Figure: 3.5 dB typical LED Inidicators: RED/ GREEN Red Solid On: Power and Receiving mode Off: No Power Green Blinking: Transmitting Connectors: N-type, female, 50 Ohm Lightning Protection: Quarter Wave Technology Power Consumption: Tx = 1A, Rx = 130 mA @ 12V DC Operating Temperature: -40° C to + 70° C Dimensions: 60" L x 28" W x 10" H Transmit Gain is automatically adjusted.