Bray non spring return electric actuator D24-210 belongs to D-Series which is a direct-mount line of electric actuators that
operates on 24V AC or DC power and is available for use
with floating, proportional, or resistive controllers. These
bi-directional actuators do not require a damper linkage, and
are easily installed on a round shaft up to a 3/4 in. (19 mm)
diameter or a square shaft up to 5/8 in. (16 mm). They can
also be mounted to valves using one of the Bray Valve
Linkage Kits.
The D-Series Models deliver up to 280 lb-in (32 Nm) of
torque. The angle of rotation is mechanically adjustable from 0 to 90° in 5-degree increments. Integral
auxiliary switches are available to indicate end-stop position
or to perform switching functions at any angle within the
selected rotation range. Position feedback is available
through switches, a potentiometer, or a 0 (2) to 10 VDC signal.
Related Product Tags:
Battery Housing , center armrest , cnc machining precise part , cnc machining precise parts , combination shaft , companion flange , coolant flange , crankshaft flange , drive flange , flange , flange screws , flange sleeve , flange type plunger , flange fork , flange machining , flange manufacturer , flange york , flanges