Skye Instruments Ltd have been designing and manufacturing quality, fully calibrated light sensors since 1983.
Skye offer sensors to measure light levels in the Ultraviolet A and Ultraviolet B wavebands. The wavelengths used in this UVA sensor are according to CIE standards.
The dimensions and overall look of these sensors are similar to that of our other sensors. The housing is black aluminum and sealed to IP67 standards.
The light sensor head is cosine corrected and has been designed with an integral amplifier to give a voltage output for use with most dataloggers, computers, PLCs, etc.
Sensors calibration is traceable to NPL and each sensor is issued with a calibration certificate.
SKU 430 SPECIFICATIONS
Construction | Anodised black aluminium, sealed to IP67. |
Cable |
Screened. 7-1-4-C military specification. Cable gland on sensor housing. |
Sensor | Cosine corrected head. Specially formulated diffuser. |
Detector | SiC Photodetector |
Spectral Response | 280nm - 315nm |
Working Range (1) | 0-10W m-2 |
Output Signal | 0-2V |
Sensitivity | 150 mV / W m-2 |
Thermal Drift of Output | 0.075mV/ max (-20 to +50) |
Thermal Drift of Zero Offset | Typically 0.03mV/ (-20 to +50) |
Absolute calibration error (2) | typ. <3%, 5% max |
Output Impedance | 500 |
Power Supply | 5-15VDC |
Cosine error (3) | 3% |
Azimuth error (4) | < 1% |
Longterm stability (5) | ±2% |
Response time (6) | better than 10ms |
Mounting | 6 x 7mm tapped hole in base. Sensor supplied with M6 x 16mm screw + 4x 1.5mm washers to suit panel thickness of 3-10mm |
Temperature range | -20 to +70 |
Humidity range | 0-100% RH |
Weight & Dimensions | 200g with 3m cable |
Related Product Tags:
coolant sensor , crank sensor , Crank Shaft Sensor , egr sensor , electronic sensor , s3 fuel sensor , Fuel Sender , fuel sensor , fuel sensor assembly , hall sensor , head lamp sensor , car head lamp sensor , impact sensor , mark sensor , oil level sensor , throttle sensor