Further advantages of the P14-W capacitive RH sensor include:
• High chemical resistance
• Very low drift
• Wide temperature range
• High humidity stability
• Resistance to condensation
• Fast recovery time
• Customer-specific sensor available upon request
The IST AG P14-W humidity sensor is available with CuP-SIL-wire post-plated with Sn, Au/Cu-wire or as SMD for automatic packaging as standard.
Technical Data:
|
Wired |
SMD |
Dimensions (L x W x H / H2 in mm) |
5 x 3.81 x 0.4 / 0.8 |
6.35 x 2.54 x 0.4 |
Capacitance at 30 % RH and +23 (C30)* |
150 pF ±50 pF |
180 pF ±50 pF |
Sensitivity at C30 = 150 pF/ 180 pF (15 % RH to 90 % RH) |
0.25 pF/% RH |
0.3 pF/% RH |
Operating humidity range |
0 % RH to 100 % RH (maximal dew point +85) |
|
Operating temperature range |
-50 to +150 |
|
Loss factor |
< 0.01 (at +23 °C, at 10 kHz, at 90 % RH) |
|
Linearity error |
< 1.5 % RH (15 % RH to 90 % RH at +23 after one point calibration) |
|
Hysteresis |
< 1.5 % RH |
|
Response time t63 |
< 5 s (50 % RH to 0 % RH at +23) |
|
Temperature dependence (nominal) |
% RH = (B1 x % RH + B2) x T [ °C] + (B3 x % RH + B4) B1 = 0.0014 [1/] B2 = 0.1325 [% RH/] B3 = -0.0317 B4 = -3.0876 [% RH] |
|
Measurement frequency |
1 kHz to 100 kHz (recommended 10 kHz) |
|
Maximal supply voltage |
< 12 Vpp AC |
|
Signal form |
alternating signal without DC bias |
|
Connections* |
CuP-SIL-wire post-plated with Sn, 10 mm or Au/Cu-wire, Ø 0.4 mm, 10 mm, or SMD, automatic assembly compatible |
* Customer-specific alternatives available
Related Product Tags:
coolant sensor , crank sensor , Crank Shaft Sensor , egr sensor , electronic sensor , s3 fuel sensor , Fuel Sender , fuel sensor , fuel sensor assembly , hall sensor , head lamp sensor , car head lamp sensor , impact sensor , mark sensor , oil level sensor , throttle sensor