Product Description
This sensor is designed for the measurement of CO concentration in gas phase. It can be used as the pin-to-pin replacement of the commercial electrochemical CO sensors which made by the other manufacturers.
Performance Characteristics
Nominal Range | 0 ~1000 ppm |
Maximum Overload | 2,000 ppm |
Sensitivity (20) | 0.04 ± 0.01 A/ppm |
Response Time (T90) | 30 s |
Zero Signal (20) | < ±0.2 A |
Baseline Shift (-20 ~ 50) | < 10 ppm |
Resolution | 1 ppm |
Linearity | Linear up to 1,000 ppm |
Bias Voltage | 0 mV |
Temperature Range | -20 ~ 50 |
Pressure Range | 1 ± 0.1 atm |
Humidity Range | 15% ~ 90%RH non-condensing |
Long Time Output Drift | < 5% signal/month |
Expected Operating Life | > 7 years in clean air |
Recommended Storage Temp | 0 ~ 20 |
Storage Life | 6 months in original packaging |
Warranty | 15 months |
Housing Material | ABS |
Weight (Nominal) | 2 g |
Orientation | None |
Related Product Tags:
coolant sensor , crank sensor , Crank Shaft Sensor , egr sensor , electronic sensor , s3 fuel sensor , Fuel Sender , fuel sensor , fuel sensor assembly , hall sensor , head lamp sensor , car head lamp sensor , impact sensor , mark sensor , oil level sensor , throttle sensor