Global Auto Parts & Accessories Marketplace
Home » Product Directory » Drivetrain » Suspension » Shock Absorber »

mananul hydraulic hose crimper wire crimper hose crimping machine for air suspension air spring

    • Application: all
    • Market Type:After Market 
    • Price: US $1 - 8,000 / Set
    • Payment Terms: L/C, T/T, Western Union,PAYPAL
    • Minimum Order: 1 Set

Quick Details

  • Supply Ability:

    100 Set/Sets per Month

  • Delivery Details:

    Within 1 month

  • Packing:

    Neutral packing or according to your requirements

  • Delivery Port:

    Guangzhou

  • OE Experience:

    No

Product Name:mananul hydraulic hose crimper wire crimper hose crimping machine for air suspension air spring

mananul hydraulic hose crimper wire crimper hose crimping machine for air suspension air spring

Application

all

Product Description:

mananul hydraulic hose crimper wire crimper hose crimping machine for air suspension air spring

 

Specification

 

Crimping force: 100T

Max opening: 175mm
Crimping range: 20mm-175mm
Acurracy: 0.05mm
Standard dies sets: 10 (size customized)
Voltage: 380V
Power: 34kw
System pressure: 30Mpa
Operate mode: auto, manual, pedal
Weight: 250kg- 300kg
Dimension: L850*W900*H1300mm
crimping way : Transverse withhold

 

The brief introduction of high pressure hose crimping machine:

 

Crimping machine is mainly used for buckling processing for high pressure rubber pipe assembly in the mechanical engineering. It can also be used for buckling the two-way bends, especially large bends and irregular shape bends. This machine features small and portable appearance, big force, low noise and easy to operate. The buckling amount can be precise adjusted through a scale. It makes the mould base division to be more even through the double inclined plane eight-flap mould seat equipped with a high accuracy guiding device.

 

Installation and Operation

 

1. Connect the electric source well as per the machine requirements, to make the direction of the motor rotation to be consistent with the rotation direction marking, and grounding protection shall be done.

 

2. Regulating the scale

The scale is used for regulating the amount of the buckling. When it is regulated clockwise, the buckling amount will decrease, when it is regulated anticlockwise, the buckling amount will increase. The scale is connected together with oil cylinder end cover through three socket head screws and three springs on the scale base. When using a hand to pull the scale (vertical to the oil cylinder end cover direction), the scale can flexibly leave from the oil cylinder end cover. When releasing the scale, the scale will be recovered relying on spring force. Before the machine is turned on, inspect carefully if the scale telescoping is flexible and if the lead connection is reliable.

 

3. The primary scale is turned within 0 line of the secondary scale, turn the machine on for test run, and observe if all actions are normal. If when the piston conducts reciprocating movement, there is a crawling phenomenon, the bleed screw on the oil cylinder top shall be unscrewed for exhausting air.

 

4. Pressure regulation

The buckling pressure and opening mould pressure will be regulated through two knobs at the back of the oil cylinder, when it is regulated clockwise, the pressure will increase, when it is regulated anticlockwise, the pressure will decrease (The pressure has already been well regulated when ex-factory).

 

5. Operation

Based on the size of the rubber hose to be buckled, select suitable mould as per the technical parameter reference table of the locking pipe and mount it on the mould base. Regulated well the scale position as per the data in the data in the table, the pipe locking can be done. After pipe locking, use a vernier caliper to mease the outside diameter dimension of the pipe sleeve after buckling to see if it meets the reference table data of the parameter. If it does not meet the data, the scale shall be precisely regulated until it meets the requirements. Because the manufactures of the pipe sleeve are different, so, specific dimension, material, hardness etc are certainly not the same. These factors would result different influences on the pipe locking result, therefore, the data in the table is only for reference, the detailed data take the pressure test as the basis.

 

 

Notices

When buckling, make the joint to locate the mould center as much as possible, the joint is not buckled on the hex nut.

Prevent tool and other foreign matter from entering the locking head.

After the work is finished for each time, the eight-block mould base must be made to extend to the greatest extent, this can make the spring to be at extension status. If not, the spring will be damage.

When working, the hand should not stretch into the locking head.

The power supply must be switched off when maintenance is done.

 

QQ20150729175231.jpg

 

 

QQ20150729175228.jpg

Company Information

Guangzhou Tech Master Auto Parts Co. Ltd. is a professional company specializing in developing, producing and exporting air suspension parts, such as, air spring, air strut, air shock absorber, air compressor, power steering pump, steering rack, control arms, other spare parts and suspension accessories, especially for Mercedes-Benz, BMW, Audi, Land Rover, Lincoln, and Ford. We also supply other models of the air suspension parts and a series of high-grade heavy truck front and rear air springs.

Company Certificates

company certificate.jpg

Production Base

 QQ20150731104455.jpg

 

 

shipping and packing1.jpg

FAQ What's your advantage? i. Resonable price ,good service ii. Reliable quality , long working life iii. Quick and safe modes of payment iv. Ships items timely and quickly v. Best Warranty,easy return vi. Our products are exported to most countries in the world.   To which places have you exported? North America, Europe, Middle East, Africa, Southeast Asia and so on.   How about your delivery time? 5-7 Working days after receiving your payment.   Product categories i. Air Suspension Springs and Shock Absorbers ii. Passenger Car Air Spring Rubber iii. Truck Suspension Cabin Air Springs iv. Spare Parts for Air Suspension Shock Absorbers v. Convuluted Air Springs vi. Air Suspension Compressor vii. Engine Turbocharger viii. Power Steering Pump   How to guarantee your after sales service? i. Strict inspection during production ii. Recheck the products before shipment to ensure our packaging in good condition iii. Track and receive feedback from our customers   What will you do for customer's complaint ? We will respond quickly to our customers within 24 hours.    

Send your message to this supplier:

logo Ms. Joyce Cui
Enter between 20 to 3,000 characters, English only.

Supplier Details

Guangzhou Tech Master Auto Parts Co. , Ltd.

Market Type: After Market 
Business Type: Others
Main Product: Air Suspension Spring, Air Suspension Shock, Air Suspension Compressor, Power Steering Pump, Turbocharger
Didn't find what you are looking for?
Please send us Your Search Requirement, or you can Post a Buying Lead,
suppliers may contact you actively.

Send Message