As control and signal cable for elevator as well as moving machine parts,its bending radius is smaller compared with round cable
As control and signal cable for elevator as well as moving machine parts,its bending radius is smaller compared with round cable
Properties:
The outer sheath is extensively resistant to oil and cooling liquid.
Standards:GB5023.6,IEC60227-6,EN 50214
Structure:
Conductor: fine strands of bare copper wire,
Acc.to VDE0295 CLASS5
Insulation:special PVC
Colour:yellow,white,orangeg with black number with white digital coding
Bearing:steel rope
Outer sheath:flexible PVC,cold resistance ,flame resistance
Colour:grey(RAL7001)
Technical data:
Rated voltage:300/500V
Test voltage:2500V
Minimum bending radius:0.3m<L<0.6M
Burning vertically test:GB/T18380.1-2001
IEC60332-1.1 993 test passed
Used under the nomal conditions.the temperature of conductor is lower than 70
Temperature range:-15 to +70
TVVB (Parallel) free suspension length must not exceed 35 meters,and the lift speed 1.6m/s.
TVVB(interwist) free suspension length must not exceed 80 meters, and the life speed must not exceed 4m/s.
Related Product Tags:
accelerator cable , antenna cable , bonnet cable , auto booster cable jumper cable , booster cable , car booster cable , brake cable , brass wire , hid resistor cable , honda hds cable , jumper cable , hid capacitance cable , data cable , d2s cable , electric cable , electrical cable , flat cable , volvo truck cable