Feature
Type DC is a sprag type freewheel cage without inner or outer races. It must be installed in a design providing races, bearing support for axial and radial loads, lubrication and sealing. The DC type version-N accepts all types of lubricants currently used in the power transmis-sion equipement.
The sprag space tolerance must not be exceeded. Inner and outer races must both have a minimum plain width "e", without any recess, to ensure the freewheel functions correctly as shown on following pages.
Alternatively, races can be made in case hardened steel shafts, or housings, to the specification below. Surface hardness of the finished part should be HRC 60 to 62, for a depth of 0, 6 mm minimum.
Core hardness to be HRC35 to 45. Surface roughness not to exceed 22CLA. Maximum taper between races: 0, 007 mm for 25 mm width.
Related Product Tags:
air bearing , auto air conditioner bearing , air conditioner bearing , air conditioner bearings , alternator bearing , alternator bearing ford , alternator bearings , axle bearing , rear axle bearing , ball bearing ring , ball bearing units , ball bearings , automobile ball bearings , ceramic ball bearing , Screw Ball Bearing , contact ball bearing , loose ball bearing , loose ball bearings