Brief Introduction.
This type of steam trap is made of alloy steel,can be used for high pressure and temperature working conditions where the medium can be the medium can be saturated steam and over heated steam,besides,It has following advantages:
1.The steam jacket is not affected by pressure changing,no air play happening.
2.Air vent device can start up very quickly at the beginning of steam supply.
3.Built-in large area filter screen ensure normal operating.
4.Easy maintenance,long service life.
5.Can be installed in any angle.
Field of Application.
Product Name: HR80/HR260 High Pressure-Temperature Steam Trap.
Pressure Rating: 10.0/26.0 Mpa.
Nominal Diameter: DN15-25mm.
Body Material: F22.
Standard Screws: BSP,NPT.
Standard Welds:SW.
Related Product Tags:
accelerating valve , high access valves , access valves , Access Valve , adjusting valve , air conditioner valve , air control valve , Air Inlet Valve , air valve , screw on repair valves , port air valve , low tension air valve , Accessories Air Valve , idle air valve , tension air valve , pressure air valve , balance valve , Ball Valve