bearing center Products
-
Shock Absorber Mounting 12305-22110 12305-22170 For TOYOTA ALTIS AT MT
OEM NO:12305-22110 12305-22170
Application:ToyotaALTIS AT MT
-
50820-SVA-A05 50820-SNA-023 50820-SVA-023
OEM NO:50820-SVA-A05 50820-SNA-023 50820-SVA-023
Application:RBL
-
Air Hose17881-22120 For TOYOTA
OEM NO:17881-22120
Application:Toyota
-
Nissan D22 PALADIN KA24DE 4WD BEARING KIT CENTER 37521-56G25
OEM NO:37521-56G25
Application:Nissan
-
Application:Toyota, BMW, Mazda, Honda, Nissan
-
Drive Shaft Center Bearing, Transmission Shaft Hanger, Cardan Shaft, Bearing, Plastic Parts
Application:Auto
-
OEM NO:12361-11170
Application:Mazda/ MazdaRx(china); Mazda/ Mazda5(china); Mazda/ Rx-8;
-
G SERIES HIGH VOLTAGE GENERATOR
Application:G SERIES HIGH VOLTAGE GENERATOR VOLTAGE GENERATOR Rated Voltage: 3kV / 3.3kV / 4.16kV / 6kV / 6.3kV / 6.6kV / 7.2kV /10kV / 10.5kV/ 11kV / 12.47kV/ 13.2kV / 13.8kV Power Range: 400kW-10000kW Rated Frequency: 50Hz/60Hz Rated Speed: 1500rpm/1800rpm Power Factor: 0.8(Lagging) Ingress Protection: IP23 / IP44 / IP54 Insulation Class: F / H(optional) Configuration: Single/double bearing Excitation System: Brushless permanent magnetic generator exctitation system ( PMG) 1)Electrical Performance Technical Characteristics Stator of High Voltage Generator Class F stator is wrapped with class F epoxy mica tape and mould pressed. Class H stator coil is operated with the mature class H insulation technology and impregnated in VPI (vacuum pressure impregnating) system. Both class F and class H stator coil are processed with anti-corona treatment. Meantime , the stator coil is designed with skewed slot structure to effectively reduce harmonic wave. Enhance the mechanical strength on the end of stator winding to effectively prevent and withstand the deformation on the end of stator caused by the sudden load or short circuit. Rotor of High Voltage Generator Triple insulated structure of the rotor coil can effectively improve the rotor turn to turn and interlayer insulation , the damp-proof and anti-corrosion ability. It will enhance the mechanical strength on the end of the winding to prevent the rotor winding from deforming under high rotation speed. Accordingly , the lifespan , reliability and environment adaptability of generator is also substantially improved. The rotating rectifier is designed as bi-section structure which is convenient for maintenance and do not require any knock down on the generator. Winding 5/6 or 2/3 pitch option can decrease the content of voltage harmonic wave and is suitable for nonlinear load application. The standard configuration is temperature sensor , PT100 and space heater Power Range The power range of ENGGA high voltage generator is from 400kW to 10000kw. Voltage Range Standard voltage is from 3kV to 13.8kV. Special voltage is available according to customers’ requirement. Frequency Range 50Hz or 60Hz are available. Poles and Speed The standard rotor configuration of high voltage generator is 4 pole salient rotor , with the speed at 1500r/min or 1800r/min. And 6/8/10/12/14 poles low/medium speed high voltage synchronous generator option is available. Waveform Distortion and Telephone Interference THD 300% In,10s). 2) Mechanical Performance Cooling Structure Radial and axial ventilation design in interior side ensures the sufficient cooling. Center Height The center height is from EG450 to EG1000 and can be customized. Installation Methord The standard installation method is IMB20 , double bearing configuration (single bearing is optional) , and can be customized according to customer’s requirement. Ingress Protection The standard ingress protection is IP23. IP44 and IP54 are optional. Cooling Method The standard configuration is IC01. The IP54 air-air cooling and air-water cooling is available. Dynamic Balancing All rotors have been dynamically balanced at factory before delivery and the accuracy of dynamic balancing conforms to ISO1940. Over Speed Capacity The generator maximum over speed is 2160rpm for 2 mins. Rotation Direction The standard generator rotation direction is clockwise viewed from the drive end of generator , while counter-clockwise rotation direction is optional according to customer’s requirement. Terminal Box The interior modular design of the generator terminal box has reserved the space for future voltage transformer and current transformer mounting. The terminal box of digital voltage regulator and auxiliary terminal box are mounted on the external side of the terminal box , which is convenient for wiring , debugging and the personal safety is assured.
-
OEM NO:04371-10011
Application:Toyota
-
OEM HB-88512-A HB88512A Drive Shaft Center Support NATIONAL FOR CHEVROLET
Application:all
-
Propshaft Center Support For Toyota Hilux 2.7L 37230-35061,37230-35060,37230-35080
OEM NO:37230-35061,37230-35060,37230-35080
Application:Toyota
-
Proshaft Mounting For Mercedes-Benz M-Class W163 1634100010
OEM NO:1634100010
Application:Mercedes Benz
-
Application:Features Constructed of fiberglass reinforced in the center and consists of a rugged plastic layer that would ensure the lifetime of the flexible rod. Assembly: metal frame and rubber wheels , Wheel assembly for easy transportation; Guide rollers and the right parts for rotary coupling; parking brake for the flexible rod. There is copper wire inside for tracing easily. Polyethylene cover: Medium density polyethylene resin for the insulating and jacketing of cables.Rolling bearing cage flotation (reel transport) for mobility should be light and easy to use in the field , including a parking brake for the flexible rod.
-
92vb4826bb6 649122 Shaft Center Bearing for Ford Transit
OEM NO:92vb4826bb6 649122
Application:Ford/ S-max(china); Ford/ Mondeo(china); Ford/ Focus(china); Ford/ Diplomat; Ford/ Maverick; Ford/ Edge;
-
Cheap Mounting HB-88509-A HB88509 Drive Shaft Center Support National FOR GMC B7 Chevrolet B7
Application:all
-
Application:all
-
8-94227-041-0 WHEEL BEARING HUB FRONT DMAX 2014
OEM NO:8-94227-041-0
Application:for isuzu
-
Stamping Component Press Machine Pressing Parts Metal Bearing Tool Piercing Punches
Application:Dongguan YIZE MOULD Co. ,LTD Address: 3/F , Factory Building , No.62 , Jinghai East Road , Shatou District , changanTown , Dongguan City , Guangdong Province , China TEL:+86-769-81888522 Email:alisa.chen@dgyize.com More information about the precision stamping mold parts of YIZE ,please visit our official website:
-
ISO9001 2008 Standard Carbon Steel CNC Machining Bearing Linear Shaft
Application:Contact Yize Mould Dongguan YIZE MOULD Co. , LTD carbide punching pins Address: No.62 , Jinghai East Road , Shatou District , changanTown , Dongguan City , Guangdong Province , China TEL:+86-769-81888522 Email:dgyize@dgyize.com More information about carbide punching pins of YIZE ,please visit our official website:
-
Heavy Truck Parts Cross Joint Cross Bearing Universal Joint
Application:Acura, Audi, BENZ , Chevrolet , Caterham , DAEWOO, Dongfeng, Geely, GOLDEN DRAGON , Volvo