magnetic power generator Products

Generator for Truck Bus

Application:Car ,bus ,truck

High Performance Low Weight Loss Ndfeb Magnetics

Lifan 520 Generator /Alternator

OEM NO:LF481Q1-3701100A

Application:Lifan

6kva Generator Magnetic Generator For Sale Small Wind Generator For Boat

Application:Dongfeng

Magnetic Assemblies

Application:All type

ZGF DC High Voltage Generator /Electric Power Supply Generator

Application:Gold

Good Quality Magnetic Induction Heating

Application:suitable all auto parts ,such us shaft ,gear , camshaft ,connecting rod etc.

ZGF DC High Voltage Generator

Application:Gold

G SERIES HIGH VOLTAGE GENERATOR

Application:G SERIES HIGH VOLTAGE GENERATOR VOLTAGE GENERATOR Rated Voltage: 3kV / 3.3kV / 4.16kV / 6kV / 6.3kV / 6.6kV / 7.2kV /10kV / 10.5kV/ 11kV / 12.47kV/ 13.2kV / 13.8kV Power Range: 400kW-10000kW Rated Frequency: 50Hz/60Hz Rated Speed: 1500rpm/1800rpm Power Factor: 0.8(Lagging) Ingress Protection: IP23 / IP44 / IP54 Insulation Class: F / H(optional) Configuration: Single/double bearing Excitation System: Brushless permanent magnetic generator exctitation system ( PMG) 1)Electrical Performance Technical Characteristics Stator of High Voltage Generator Class F stator is wrapped with class F epoxy mica tape and mould pressed. Class H stator coil is operated with the mature class H insulation technology and impregnated in VPI (vacuum pressure impregnating) system. Both class F and class H stator coil are processed with anti-corona treatment. Meantime , the stator coil is designed with skewed slot structure to effectively reduce harmonic wave. Enhance the mechanical strength on the end of stator winding to effectively prevent and withstand the deformation on the end of stator caused by the sudden load or short circuit. Rotor of High Voltage Generator Triple insulated structure of the rotor coil can effectively improve the rotor turn to turn and interlayer insulation , the damp-proof and anti-corrosion ability. It will enhance the mechanical strength on the end of the winding to prevent the rotor winding from deforming under high rotation speed. Accordingly , the lifespan , reliability and environment adaptability of generator is also substantially improved. The rotating rectifier is designed as bi-section structure which is convenient for maintenance and do not require any knock down on the generator. Winding 5/6 or 2/3 pitch option can decrease the content of voltage harmonic wave and is suitable for nonlinear load application. The standard configuration is temperature sensor , PT100 and space heater Power Range The power range of ENGGA high voltage generator is from 400kW to 10000kw. Voltage Range Standard voltage is from 3kV to 13.8kV. Special voltage is available according to customers’ requirement. Frequency Range 50Hz or 60Hz are available. Poles and Speed The standard rotor configuration of high voltage generator is 4 pole salient rotor , with the speed at 1500r/min or 1800r/min. And 6/8/10/12/14 poles low/medium speed high voltage synchronous generator option is available. Waveform Distortion and Telephone Interference THD 300% In，10s). 2) Mechanical Performance Cooling Structure Radial and axial ventilation design in interior side ensures the sufficient cooling. Center Height The center height is from EG450 to EG1000 and can be customized. Installation Methord The standard installation method is IMB20 , double bearing configuration (single bearing is optional) , and can be customized according to customer’s requirement. Ingress Protection The standard ingress protection is IP23. IP44 and IP54 are optional. Cooling Method The standard configuration is IC01. The IP54 air-air cooling and air-water cooling is available. Dynamic Balancing All rotors have been dynamically balanced at factory before delivery and the accuracy of dynamic balancing conforms to ISO1940. Over Speed Capacity The generator maximum over speed is 2160rpm for 2 mins. Rotation Direction The standard generator rotation direction is clockwise viewed from the drive end of generator , while counter-clockwise rotation direction is optional according to customer’s requirement. Terminal Box The interior modular design of the generator terminal box has reserved the space for future voltage transformer and current transformer mounting. The terminal box of digital voltage regulator and auxiliary terminal box are mounted on the external side of the terminal box , which is convenient for wiring , debugging and the personal safety is assured.

ZGF DC High Voltage Generator

Application:GOLD

LED protabel led light 15w rechargeable led light led work light with magnetic , led work light rechargeable

Application:all

Automatic Voltage Regulator (AVR) AVR MX321

OEM NO:165mm*145mm*55mm

Application:GENERATOR

Gear Box / Gear Forging Used For Wind Power Generator

OEM NO:As Your Request

Application:Nissan

2418368,241-8368 Caterpillar SWITCH ASSEMBLY-MAGNETIC,Original CAT Magnetic Switch(24 V) For C27 C9.3 C15 C32 C18 SPF343C SPF743 C13 Industrial Engine

Application:caterpillar

Generator Controller MRS10 In Stock

Application:generator

Electro-Magnetic Retarder Controller

OEM NO:HSK242BBC

Armature Winding Machine starter and generator manufacturing machines

OEM NO:LAW-5B

Application:universal

Automobile Sensor Signal Simulation Tool/Expert Mst-9000+ 2012 Improved Version

OEM NO:Mst-9000+

Application:Audi, VW, BMW, Seat, Skoda, Peugeot, Citroen, Renault, Honda, Toyota, Nissan, Ford, renault...

Master Power Switch JK451Z

OEM NO:N/A

High Power Neodymium Arc Magnets

Application:Beiqi , ChangheAuto