Solid CBN Inserts

Product Attribute:

Applicationt: 

all car

Production Description:

Solid CBN Inserts

Solid Cbn Inserts Are Used For Rough And Finish Machining Of Hard Steel ,Cast Iron And Hard Surface Workpiece.

Type: RNMN,SNMN,TNGN,CNMN,RCMN,RCMXApplication:turning Hard Steel,Cast Iron

 
Details

Cubic Boron Nitride Inserts (CBN Inserts) Is A High-Performance Type Of Cutting Tool Material From A Polycrystalline Mass. CBN Is A High Hardness, High Heat Resistance Crystal Synthesized By Boron And Nitrogen Under High Temperature And High Pressure.

Applications Of Solid CBN Inserts:

Processing Workpiece: Rough And Finish Machining Of The Hard Steel ,Cast Iron And Hard Surface Workpiece.

Processing Materials: Ferrous Materials Possessing Hardness From Approximately 45 HRC As Well As Gray Cast Iron, Cr-Chilled Cast Iron And Wear Alloys On A Cobalt, Nickel Or Iron Basis.

Specification Of Solid CBN Inserts:

Insert Type	Dimensions				Standard Cutting              Edge
	L	Ø I.C	S	R
RNMN060400	6.35	6.35	4.76	0	T01020 T01025 T02020 T02030 S01020 S01025 S02020 S02030 S05020 S10020
RNMN090300	9.525	9.525	3.18
RNMN090400	9.525	9.525	4.76
RNMN120400	12.7	12.7	4.76
RNMN120600	12.7	12.7	6.35
RNMN120700	12.7	12.7	7.94
RNMN190700	19.05	19.05	7.94
RNMN201000	20	20	10
RNMN251000	25.4	25.4	10
RNMN251200	25.4	25.4	12

Inserts Type	Dimensions				Standard Cutting Edge
	L	Ø I.C	S	R
SNMN090302	9	9.525	3.18	0.2	S02020 S05020 S10020
SNMN090304	9	9.525	3.18	0.4
SNMN090306	9	9.525	3.18	0.6
SNMN090308	9	9.525	3.18	0.8
SNMN090312	9	9.525	3.18	1.2
SNMN090404	9	9.525	4.76	0.4
SNMN090408	9	9.525	4.76	0.8
SNMN090412	9	9.525	4.76	1.2
SNMN120404	12	12.7	4.76	0.4
SNMN120406	12	12.7	4.76	0.6
SNMN120408	12	12.7	4.76	0.8
SNMN120410	12	12.7	4.76	1.0
SNMN120412	12	12.7	4.76	1.2

Inserts Type	Dimensions				Standard  Cutting Edge
	L	Ø I.C	S	R
TNGN110304	11	6.35	3.18	0.4	S01020 S02020