[May 19, 2010]
 |
The Supporting Roller Has The Thick- Wall Outer Ring, By Which The Roller Can Be Rolled Directly At The Rollway And Withstand The Large Load. The Supporting Roller Made By Our Company Include STO, RSTO, NA22…2RS, RN22…2RS, NATR NATR…PP, NATV…PP, NUTR NAST, |
|---|
[May 19, 2010]
|
The Curve Roller Is Composed Of A Bolt, Thrust Collar, Outer Ring, Needle And Cage Assembly Of Full Complement Rolling Body, It Has The Thick- Wall Outer Ring With Camber Outside Face, Withstanding The High Radial Force. The Curve Rollers Made By Our Company Include KR, KRE, KRV, KRVE, NUKR And NUKRE. Model KR…PP, KRE…PP, KRV…PP, KRVE…PP, NUKR…PP Curve Roller. |
|---|
[May 19, 2010]
|
The outer ring of drawn cup needle roller bearing is punched with the high-quality steel sheet.The outer ring has thin wall.The drawn cup needle roller bearing has the characteristics of small radial section area,large load carrying capacity,less inertia and economic manufacture.It is suitable for small section height,or when the housing bore isn’t used for raceway,this type is recommended to use.The bearing is assembled into the housing bore under a certain pressure without further axial location.
The drawn up needle roller bearing has two structures-with retainer and with full of needle.They are diveded into open-end type and close-end type.The structure with retainer has the single seal ring and double seal ring. |
|---|
[Apr 16, 2010]
|
Cage needle roller assemblies is our main products |
|---|
[Apr 16, 2010]
|
This needle -angular contact balllbearings are particularly space-saving rolling bearings ,to withstand heavy radial loads and axial light load.Axial load can not be greater than the radial load of 25%. |
|---|
[Apr 16, 2010]
|
Thrust needle roller bearing, Series AXK, AXW, AX, TC, NTB.
The thrust needle roller bearing is such a manner that the needles with cage are set up in the space between rollway and collar and the cage reliably guides and clamps a lot of rolling bidies. There is a little difference amonge the rolling bodies in the same set, The thrust needle roller bearing is the one only supporting the axial load in one direction. It is used as the bearing allocation having the good rigidity and axial small space. |
|---|
|