Home » Showroom » » Products » Compressor » DCW17B PV6 AC Compressor Applicable For AUDI A6 Avant 1997-2005 98 99 00 01 02 03 04 Audi 100 OEM#8D0260805E 4A0260805AH

DCW17B PV6 AC Compressor Applicable For AUDI A6 Avant 1997-2005 98 99 00 01 02 03 04 Audi 100 OEM#8D0260805E 4A0260805AH

DCW17B PV6 AC Compressor Applicable For AUDI A6 Avant 1997-2005 98 99 00 01 02 03 04 Audi 100 OEM#8D0260805E 4A0260805AH

Application:  AUDI A6 Avant 1997-2005

OEM No/Model:  8D0260805E A0260805AH

Market Type:  After Market

Samples:  Charge

Place of origin:  China

Export Ratio:  91% - 100%

Price Terms:  FOB

Minimum Order:  1Set/Sets

Product Attribute:

Applicationt: 

AUDI A6 Avant 1997-2005

Production Description:

 

Details:  

Model no. INTL-XZC013

Compressor type:DCW17B  

Grooves: 6 PK

Pulley Diameter: 130MM

 

Application: 

AUDI A6 Avant 1997-2005

1998 AUDI A6 Avant

1999 AUDI A6 Avant

2000 AUDI A6 Avant

2001 AUDI A6 Avant

2002 AUDI A6 Avant

2003 AUDI A6 Avant

2004 AUDI A6 Avant

2005 AUDI A6 Avant

AUDI 100  

  

 

OEM#

8D0260805E

A0260805AH

 

Basic Requirements when servicing an A/C system:

 

1, The Accumulator or Filter Drier should always be replaced when the Air Conditioning System is opened. For warranty Purposes buyer must show evidence of receiver/drier replacement. In some vehicles the drier comes attached to the condenser so it must replaced as well

 

2. A/C system must be clean and free of debris and contaminants. In most cases components can be flushed; however in some instances it may be necessary to replace the condenser or other items.

 

3. Orifice tube must be replaced; expansion valve must be inspected and replaced if dirty or defective.

 

4. Correct amount and type of oil must be used. Please refer to the OE manufacturer for this information.

 

5. Prior to refrigerant charging, full vacuum must be done for a minimum of 45 minutes. In humid climates or during cooler days, this time should be increased to effectively remove air and boil off moisture.

 

6. The Orifice Tube, if equipped, should always be replaced and the Expansion Valve, if equipped, should at least be inspected for proper operation if not replaced

Send your message to this supplier

Enter between 20 to 3,000 characters, English only.
http://www.gasgoo.com/new/common/contactsupplier.aspx?type=4&id=1081347