|
Introduction:
Application: tour bus and intercity bus.
(Fits to Mercedes,Man,BMC,Isuzu,Otokar,Cobra,MCV,HNS,yutong,zhongtong,ankai,kinglong,etc)
System Component: Rotary actuator, Shaft assembly
1) The actuator provides rotary motion and Lift-to-latch feature.
A double acting cylinder drives a splined shaft through a helical ball cage to provide rotary motion. When the door reaches the closed position, the actuator lifts the door shaft and door panel approximately 10mm,enabling latches on the door panel to engage mating wedges on the door jambs.The door panel is held closed as long as air pressure is applied the actuator.
2) The shaft assembly is designed for easy installation and maintenance.
Operating principle:
1)Auto operation :When open or close switch is pushed, the 5-way 2-position solenoid valve will be actuated, which drives linear pneumatic cylinder move up and down. Through splined shaft,the linear motion transfer to rotation, which cause the door open or close.
2)Emergency release: In case of emergency, rotate the emergency valve 90 degree to release the air pressure. The door panel will drop as soon as air pressure in the cylinder is low. Push the door panel manually to open the door
3)Sensitive edge: In case the passenger or other items are clamped during the vehicle door closing, the door panel will be lifted and actuate the limit switch to reverse the motion to open the door.
Main Parameter:
|
Maximum torque in locked position (@90 psi)
|
122 ft-lbs
|
|
Recommended door shaft rotation
|
90 degree
|
|
Operating temperature
|
-30°C to 80°C
|
|
Envelope size
|
5.51w x 12.50d x 4.53h
|
|
Operating pressure
|
90-125 psi
|
|
Minimum Life cycle
|
500,000
|
|
Locking mechanism
|
Local wedge lock
|
|
Door closing time
|
3-5 seconds
|
|
Door opening time
|
3-5 seconds
|
Please contact with me if you are interested in our products.
|