KP-2.1000D FACTION&INTRODUCTION this is the full range& 2 channels classD car amplifier. 1.Advanced circuit design(class D) to reflect hipro & high-perfermance. 2.Reliable circuit safeguard (overcurrent, short circuit, DC, temperature etc.) 3.Glit RCA of input signal-end. 4.Function of "High level input". 5.Be equipped with Bridging to expand high-pass electronic to output. 6.High pass/low-pass/Flat cutover and all adjustable rang between full-featured to subwoofer to achieve perfect sounds. 7.Sensitivity input & cutover switch to link high-signals. 8.The grossover & bassboost can reinfore low frequency signals in subwoofer state. 9.Dynamic circuit box-design that the vivid music-signals appeared. 10.Whirl position adjustable. 11.With Function of "REMOTE LEVEL" designed. KP-2.1000D CAR AMPLIFIER MAIN PARAMETERS 1.OUTPUT POWER(RMS)DC14.4V: 500W*2/4ohm @ THD+N=1% 600W*2/4ohm @ THD+N=5% 1000W*2/2ohm @ THD+N=1% BTL OUTPUT POWER(RMS): 2000W@4ohm THD+N=1% THD+N: FREQUENCY RESPONSE@-3dB(UNIT:Hz):10-20KHz LOW PASS:50-150Hz HI PASS:40-500Hz Bassboost(UNIT:dB):0-18dB(REMOTE 0-15dB) Input impedance(UNIT:ohm):20K Signal to noise(UNIT:dB): 95dB(A Weight) Dimension(UNIT:mm):430(L)*250(W)*53(H)
RMS.POWER OUTPUT @ 4ohm: 4 x 80W @2ohm: 2 x 125w @BRIDGE: 200W x 2 SIGNAL TO NOISE(DB): 98dB FREQUENCY RESPONSE: 25Hz-40KHz TOTAL HARMONIC DISTOTRTION: 0.05% DIMENSIIN(W x H x L)mm: 273 x 56 x 420
KP-1500D FUNCTION & INTRODUCTION This is the mono classD amplifier with the system of stereo. 1.Advanced circuit design(class D) to reflect hipro & high-perfermance. 2.Reliable circuit safeguard (overcurrent, short circuit, DC, temperature etc.) 3.Glit RCA of input signal-end. 4.Function of "High level input". 5.Be equipped with Bridging to expand high-pass electronic to output. 6.High pass/low-pass/Flat cutover and all adjustable rang between full-featured to subwoofer to achieve perfect sounds. 7.Sensitivity input & cutover switch to link high-signals. 8.The grossover & bassboost can reinfore low frequency signals in subwoofer state. 9.Dynamic circuit box-design that the vivid music-signals appeared. 10.Whirl position adjustable. 11.With Function of "REMOTE LEVEL" designed. KP-1500D THE MAIN PARAMETER OUTPUT POWER(RMS)DC14.4V: 1600W/1ohm @ THD+N=1% 2000W/1ohm @ THD+N=5% 900W/2ohm @ THD+N=1% THD+N: FREQUENCY RESPONSE@-3dB(UNIT:Hz):10-200Hz Subsonic(UNIT:Hz):15-50Hz Crossover(UNIT:Hz):50-200Hz Bassboost(UNIT:dB):0-18dB Input impedance(UNIT:ohm):20K Dimension(UNIT:mm):406(L)*240(W)*45(H) Signal to noise(UNIT:dB): 95dB(A Weight)
RMS.POWER OUTPUT @ 4ohm: 2 x 7W @2ohm: 14W @BRIDGE: 14W SIGNAL TO NOISE(DB): 85dB FREQUENCY RESPONSE: 25Hz-20KHz TOTAL HARMONIC DISTOTRTION: 0.05% DAMPING FACTOR: 120 DIMENSIIN(W x H x L)mm: 180 x 50 x 160
KP-475 FUNCTION&INTRODUCTION This is a full range and four-channels stereo classAB amplifier. 1.Traditional (class AB) circuit design with high-stability & timbre. 2.Reliable circuit safeguard (overcurrent, short circuit, DC, temperature...) 3.Glit RCA of input signal-end. 4.Fuction of "High Level Input". 5.Bridging 2 emplifier between to expand high-pass electronic to output. 6.High-pass/low-pass/Flat cutover and full adjustablerange between fll-featured to subwoofer to aid in audio syatem design. 7.Sensitivity input & cutover switch to link high-signals. 8.Grossover & bassboost can reinfore low frequency signals in the position of subwoofer. 9.Dynamic circuit box-design that the vivid music-signals appeared. 10.Whirl position adjustable 11."REMOTE LEVEL" designed. B. THE MAIN PARAMETER 1.OUTPUT POWER(RMS)DC14.4V: 55W*4/4ohm @ THD+N=1% 65W*4/4ohm @ THD+N=5% 70W*4/2ohm @ THD+N=1% BTL OUTPUT POWER(RMS)DC14.4V 160W*2/4ohm @ THD+N=1% THD+N(PER CH): FREQUENCY RESPONSE@-3dB(UNIT:Hz):10-40KHz LOW PASS:10-150Hz HI PASS:200-40KHz Bassboost(UNIT:dB):0-18dB(REMOTE 0-15dB) Input impedance(UNIT:ohm):20K Signal to noise(UNIT:dB): 95dB(A Weight) Dimension(UNIT:mm):230(L)*250(W)*44(H)