Portable Scissor Hydraulic Lift SDN-SP-2.7 In order to ensure that receive your message, please kindly send inquiry directly to: info(at)sednvo(dot)com web ID: www(dot)sednvo(dot)com Lifting capacity:2700kg Lifting height:1000mm Min. height:120mm Lifting time:40-50s Motor:2.2kw Voltage:110v/220v/240v/380v/415v option Feature: It is movable. The lock is manual which is suitable for some moving repair. There are the adjustable pads which can make the lift lifting higher
Portable Scissor Hydraulic Lift SDN-SP-2.7 In order to ensure that receive your message, please kindly send inquiry directly to: info(at)sednvo(dot)com web ID: www(dot)sednvo(dot)com Lifting capacity:2700kg Lifting height:1000mm Min. height:120mm Lifting time:40-50s Motor:2.2kw Voltage:110v/220v/240v/380v/415v option Feature: It is movable. The lock is manual which is suitable for some moving repair. There are the adjustable pads which can make the lift lifting higher
Scissor design car lifting equipment with CE Main feature: 1.Can pull, max: 1750mm 2.Filling oil 3.Up limit switch 4.Pneumatic lock 5.Mold tooling technology, average tooth spacing error of 0.1mm. 6.Integral base, easy to install, and horizontal adjustment capability. Model DK-30S/35S Capacity(kg) 3000kg/3500kg Rise/ Drop time(s) 60/45 Lift height(mm) 2130mm(traver route) Platform length(optional) 1550mm-1750mm(optional) Platform width(mm) 550mm Min height(mm) 330mm Power supply(v) 380V/220V Motor power(kw) 2.2kw Hydraulic oil 46#wear-resistant hydraulic oil Technical parameter: Foundation Requirements of Scissor Lift: 1.Concrete type 425#, Dry period 15days. 2.To clear the foundation pit surface, the thickness of the pit bottom of the concrete should be no less than150mm. 3.Two foundation pit level degrees should be no more than 5mm. 4.Embedded console to the foundation pit and two pit should be no less than 100mm,convenient for the conbination of PVC pipe, tubing the trachea and wires. 5.Power connected to the console(380V or 220V 15A). 6.Compressed air intake manifold connected to the console(8×6m). 7.The foundation concrete thickness and critical levels are of great importance, you can not expect too much to the machine s own level of ability to regulate.
Portable Mid-Rise Scissor Lift SDN-SP-2.7 In order to ensure that receive your message, please kindly send inquiry directly to: info(at)sednvo(dot)com web ID: www(dot)sednvo(dot)com Lifting capacity:2700kg Lifting height:1200mm Min. height:120mm Lifting time:40-50s Motor:2.2kw Voltage:110v/220v/240v/380v/415v option Feature: It is movable. The lock is manual which is suitable for some moving repair. There are the adjustable pads which can make the lift lifting higher
chinacoal12 m.chinacoalintl.com 1.Hydraulic Single Post Underground Car Lift with Pneumatic Locks Hydraulic Single Post Underground Car Lift,Pneumatic Lock Car Lift, Car Lift, Brief Introduction: The machine adopts low pressure oil driving,so it is simple,reliable and convenient in maintenance. main unit of F Series Inground Lift is installed under the ground with only bracket arm above. Lay the damaged car on the bracket arm and press the "UP" button.After the car is lifted to the proper height,repair can be started.After the repairing,press the"DOWN button.When car was lowered to the ground with the bracket arm,drive it away. Control cabinet is set on the ground for convenient operation. Features: The bore and piston of lifting cylinder use the high-quality alloy steel as the material with hard chromium coated,so it is quite durable. The seal of cylinder is Parker,which is excellent in sealing property and long service life. Pipeline explosion valve is equippied inside the cylinder.It can ensure the security when there are uncommon conditions on oil pressure pipeline. The lifting columns of two post and multi post lifts are rigidly connected with synchronous beam(separated type),so it is excellent in synchronous performance and steady. Equipped with mechanical pneumatic locks,it can stop in any position automatically to ensure safety. Technical Parameters: No Parameter Unit Value 1 Max lifting capacity kg 3500 2 Max.Lifting height mm 1850 3 Entire Lifting(Dropping)Time sec 40-60 4 Supply Voltage V/HZ AC220/380V/50HZ; AC230/400V/50HZ 5 Power KW 3 6 Motor Speed rounds/minute 2870 7 Output of oil pump ml/round 2 8 Set pressure of the overflow valve bar 130 9 Solenoid valve pressure V/HZ AC220V/50HZ 10 Voltage of mechanical lock electromagnet V/HZ AC220V/50HZ 11 Sound level (measured at control console) dBA 75 12 Main unit length mm 420 13 Main unit width mm 420 14 Main unit height mm 2270 15 N.W KG 780
Car used two post car lift for garage Main feature: 1.Tray 2.24V/CE standard ABS control box 3.Top limited switch 4.Wire rope anti-shedding device 5.Height from the ground Min:100/110/140mm 6.Chain anti-shedding device 7.Tubing explosion-proof device 8.Hydraulic cylinder process to create a mirror-polished surface, to achieve the level of mirror. 9.Slide square tube adopts 5mm international standard. 10.International Q235 16mm 11.6mm (inside and outside) tube thickness 12.Solid 25mm toe board 13.Q235 International 4mm checkered plate, and bottom with angle iron welded reinforcement, so that car would not deformed. 14.Q235 international 16mm board 15.The SS400 international standard 6mm opened Tablet column. Technical parameter: Model DK-240E Capacity(kg) 4000kg Lift height(mm) 1900mm Rise time(s) 50 Drop time(s) 40 Power supply(v) 380V/220V Motor power(kw) 2.2kw Machine height(mm) 2826mm
Underground Install Scissor Auto Hoist In order to ensure that receive your message, please kindly send inquiry directly to: info(at)sednvo(dot)com web ID: www(dot)sednvo(dot)com Lifting capacity: 3200kg Lifting height: 2030mm Minimum height: 330mm Pneumatic supply: 110V/220V/380V Weight: 665kg Features 1.In-ground installation. 2.Double cylinder structure with 330mm under rench installation. 3.Aluminum shell motor for overheat prevention. 4.Operating control system of 24V safety voltage. 5.With 24V limit switch. 6.Safety signal at lowering to 500mm above ground. 7.Two platforms can be extended for different length of vehicles. 8.Pass 115% dynamic and 150% static loading test. 1) Pre-sale service : Service: Act as a good adviser and assistant of clients enable them to get rich and generous returns on their investments . a. according to client requirements , give a good recommendation and suggestion . b. Within 12 hours, timely and effective response to the customer . c. provide the information of shipment term, payment term, delivery time . d.OEM: customize made label/logo , customize made as buyers special requirements 2) Service During the sale : a. Timely and effective follow-up production processing , and give feedback with pictures or video . b. Tracking the shipping situation , and give feedback . c. Examine the product before package . 3) After-sale service : a. Training the first-line operator ,provide the installation manual instruction. b.Warranty: Our products are warranted for 1 years on equipment,to be free of defects in material and workmanship.
One Post Car Lift SDN-OP-2.5 In order to ensure that receive your message, please kindly send inquiry directly to: info(at)sednvo(dot)com web ID: www(dot)sednvo(dot)com 1. Lifting capacity: 2700kg 2. Lifting height: 1800mm 3. Minimum height: 125mm 4. Lifting time: 50-70s 5. Overall height: 2516mm 6.Overall m7. Motor power: 2.2kw 8. Power supply: 220V/240V/380V/415V Feature: Space saving single post design can be positioned either to give complete free access to the drivers door. Single hydraulic Cylinder. Heavy-duty leaf chain. Freestanding design Durable construction for maximum stability. Mechanical safety device against the accidental Lowering. Adjustable support arms. Safety valve against the breaking of the hydraulic SEDNVO IMP&EXP CO.,LTD MAINLY PRODUCTS: Single post car lift, two post auto lift, four post car hoist, mid scisccor lift, alignement scissor vehilce lift, In-ground scissor car elevator, wheel balancer and tyre changer. For more detail, welcome to contact us.
In floor car lift for workshop Main feature: 1.Can pull, max: 1750mm 2.Filling oil 3.Up limit switch 4.Pneumatic lock 5.Mold tooling technology, average tooth spacing error of 0.1mm. 6.Integral base, easy to install, and horizontal adjustment capability. Model DK-30S/35S Capacity(kg) 3000kg/3500kg Rise/ Drop time(s) 60/45 Lift height(mm) 2130mm(traver route) Platform length(optional) 1550mm-1750mm(optional) Platform width(mm) 550mm Min height(mm) 330mm Power supply(v) 380V/220V Motor power(kw) 2.2kw Hydraulic oil 46#wear-resistant hydraulic oil Technical parameter: Foundation Requirements of Scissor Lift: 1.Concrete type 425#, Dry period 15days. 2.To clear the foundation pit surface, the thickness of the pit bottom of the concrete should be no less than150mm. 3.Two foundation pit level degrees should be no more than 5mm. 4.Embedded console to the foundation pit and two pit should be no less than 100mm,convenient for the conbination of PVC pipe, tubing the trachea and wires. 5.Power connected to the console(380V or 220V 15A). 6.Compressed air intake manifold connected to the console(8×6m). 7.The foundation concrete thickness and critical levels are of great importance, you can not expect too much to the machine s own level of ability to regulate.
chinacoal12 m.chinacoalintl.com 5.DFPL712B Hydraulic Four Post Garage Lift Four Post Garage Lift ,DFPL712B car Lift ,Hydraulic Lift Product Description 1)Cable-driven lifting system 2)Pneumatic single point release 3)Adjustable self-lock system pledge the vehicle safe and balanced in different height 4)Steel cable anti-rupture protection, ensure safety 5)Maintenance free load bearing 6)Slideway for other equipment inside of the runway 7)Adjustable runway for different tread vehicles 8)Mold machining through the whole process so that the parts are universal and interchangeable 9)120% capacity Dynamic load text and 150% static load test 10)Italian oil seal to make sure no oil leakage 11)Electromagnetic valve with urgent manual drop function Model No. Lifting Capacity Lifting Height Width Between Posts Width Between Runways Rise/Drop Time Power DFPL712B 5500kgs/12000lbs 1800mm 2907mm 1092mm 75/65S 2.2kw