Product Parameters Model Smart Box-5 Cover Material PC+ABS+fireproofing Battery Cell Li-polymer Capacity 5400mAh Input 12V/1A Output1 5V/2A for digital devices (tablet PC,smart phone,MP3/MP4, PSP, camera etc) Output2 12V for car jump start Start Current 200A Peak Current 400A Charging Time 2 hours Dural Temp -20°C~60°C/-4°F~140°F LED light Lighting, burst flashing, SOS Life time 800 cycles Size 136*77*15mm Weight 235g Certification CE/FCC/RoHS/ISO Warranty 1 year Whole Set Containing Main Product x1 Home Charger x1 Car Charger x1 Jump Cable Battery Clamps x1 Instruction Manual x1 Package: fine brown paper box & PU zipper bag Illumination Press the switch button 3 seconds to start the normal LED illumination and then 3 modes of LED light appear in sequence (burst flashing, SOS, off) if you press lightly 1. First Press for 3 seconds torchlight 2. second press lightly burst flashing 3. third press lightly SOS 4. final press lightly off Multi-Function 1. supply power for the digital devices using 5V/2A via USB connector 2. using for car jump start direclty via specially designed battery clips Advantage 1. the intelligent IC card and other electronic components on the guard plate are developed by our USA researching team and imported from Japan, its energy transferring rate can reach over 90% 2. the battery cell is made of Li-polymer, which is environment-friendly and much safer and more stable, and it gets UL certificate 3. the appearance of this car jump starter is designed by experts, fashionable and compact, it can become your one fashionable item 4. our home charger is offered by the supplier who is the supplier of Apple Computer Inc, owning high quality and fashionable appearance 5. the battery clamps is anti-converse charge How to use to start the vehicle 1. Make sure the battery power is available for use when starting the car. Press the switch button lightly to check there are at least 2 LED bright lights then remember to press again to finish checking 2.Connect the battery clamps to car battery Red battery clamp must be connected with car battery positive(+) terminal, while black battery clamp with car battery negative(-) side. 3. Insert the other end of plug into Jump starter 4. Turn the ignition switch to start the car 5. Disconnect the plug immediately after the start 6. Remove the battery clamps Warning 1. do not connect the clamps in the opposite way, red clamp connects "-" battery of the car and black clamp connects "+" battery fo the car 2. when the battery clamps is connected to the car jump starter, don t connect the red clamp with the black clmap directly 3. disconnect the car jump starter with the battery clamps once the car is started, and then remove the battery clamps from the car s battery 4. store it in dry and lower temperature place
- Application :
- All kinds of cars whose displacement is less than 3.0l