Oxygen Sensor Oza632-Sz1 For Peugeot 206 T5 , Ki A Pride , Siemens , Saipa Tiba , Ikco Runna Siemens Product Specifications/Features Details Type: Oxygen sensor Size: Normal Car Make: Peugeot 206 T5 , KI A PRIDE ,SAIPA TIBA , IKCO RUNNA Siemens OE NO.: 0258017121 0045428618 A 0045428618 Place of Origin: China (Mainland) Warranty: 12Months Cable Length [mm]: 390 Wires: 4 Certificates: ISO9001/TS16949
COZIR LP Low Power, Low Profile Carbon Dioxide Sensor COZIR LP is a low profile, low power, high performance CO2 sensor. Operating at a 2Hz update rate while only consuming 3mW5 , its world leading power consumption make it ideally suited for battery operation and portable instruments. Based on proven GSS IR LED and Detector technology and innovative optical designs. COZIR LP is a third generation product from Gas Sensing Solutions Ltd - leaders in IR LED CO2 sensing. With measurement ranges of 0-2000ppm, 0-5000ppm and 0-1% the COZIR LP Sensor is suitable for applications such as Building Control and Indoor Air Quality. ·Ultra-low Power 3mW ·Measurement ranges from 0 to 1% ·3.3V supply ·Peak current only 33mA ·Commands set and electrical interface compatible with GSS COZIR sensor range Specifications General Performance Start up time First: reading 1.2s after power on Operating Conditions: 0°C to 50°C (Standard) -25°C to 55°C (Extended range) 0 to 95% RH, non-condensing Recommended Storage: -30°C to +70°C CO2 Measurement Sensing Method: Non-dispersive infrared (NDIR) absorption Patented Gold-plated optics Proprietary GSS Solid-state source and detector Sample Method: Diffusion Measurement Range: 0-2000ppm, 0-5000ppm, 0-1% Accuracy: ±50 ppm +/- 3% of reading Calibration: Autocalibration Non Linearity: 1% of FS Pressure Dependence: 0.13% of reading per mm Hg in normal atmospheric conditions. Operating Pressure Range: 950 mbar to 1050 mbar Response Time: 2 - 3 mins (Configurable via filter type and application) Reading refreshed twice per second.
--Lambda Oxygen Sensor For Bmw Km81844 11787589147 Es2042112B1 0258010425 11787603023 Product Specifications/Features dition: New: A brand-new, unused, unopened and undamaged item in original retail packaging (where packaging is applicable). If the item comes direct from a manufacturer, it may be delivered in non-retail packaging, such as a plain or unprinted box or plastic bag. See the seller s listing for full details. See all condition definitions MPN: MS404Q Reference OE/OEM Number: 0258010240, ES2042112B1, 0258010427, 0258010158 Brand:
SO-E2-960 Limiting Current Type Sensor Oxygen sensors When voltage is applied to a zirconia electrolyte cell, oxygen is pumped through the zirconia disc from the cathode side to the anode side because the carriers of the current flowing through the zirconia electrolyte are oxygen ions. By attaching a cap with a pinhole on the cathode side of the cell and by increasing the voltage over the cell the current shows saturation due to the rate limiting step in the transfer of oxygen to the cathode. This saturation current is called limiting current and is nearly proportional to the ambient oxygen concentration. Below the advantages of the oxygen sensor: measuring range 1.00 to 96.0 vol.% oxygen High accuracy For many types a more or less linear characteristic Small temperature dependence of the sensor signal Low interference with other gases Long service life In many cases Single point calibration necessary only once Applications: Medical Laboratory Food industry Household/Gastronomy Measuring technique Security technology/Monitoring (Electrical-) industry Characteristic Data: Measuring gas: Oxygen concentration Measuring medium: Gaseous atmosphere Measuring principle: Limiting current type sensor Measuring ranges: 1.00 96.0 vol.% O2 Response time (t90) 2 to 25 sec. (Depends on: sensor type, gas flow, measuring chamber) Sensor voltage / heating voltage / power consumption / heater cold resistance Sensor voltage: 0,7 to 1,6 Volt Heating voltage: 3.6 4.4 Volts Power consumption: 1.3 to 1.8 Watts (depends on application and packaging) Cold resistance: R( 25°C ) = 3.25 ± 0.20 Warm up time: Min. 30 s Maximum permissible operating temperature: 350 °C (*) *Depending on the cable and filter assembly (see paragraph: specification, Cable assembly) Permissible volumetric flow rate (Purging the sensor) For all sensor types, the maximum flow rate depends on the way of purging the sensor (sensor in direct gas flow, gas beam shape, etc.) and the size of the measuring chamber. Exception: SO-E1-xxx (TO8 + hose connection for direct gassing). Permissible flow [ml/min]: 100 - 500 (optimal: 250) Lifetime (MTTF): ~ 20.000 hours (*) * Depending on measuring medium. Stated lifetime refers to a heated, operated sensor of type SO-xx-250 and SO-xx-960. A failure or reaching the lifetime typically means a slight deviation from the dispatch specifications. Vibration resistance Sensors based on the TO8 socket as well as those built with a TO39 socket (SO-Bx-xxx, SO-Ex-xxx, SO-Ax-xxx) meet the European Norm EN60068-2-6 (Sinusoidal vibration tests).
Product Specifications/Features OEM: 06J906262AA MPN: 17270 By Bosch Brand new, Genuine Bosch OEM oxygen sensor. Exposure to carbon, soot, harmful gases, antifreeze, chemicals, and thermal and physical shock will shorten the life of an oxygen sensor. A worn sensor could result in reduced gas mileage, poor engine performance, and/or emissions test failure. That s why checking, and if needed, replacing a worn-out oxygen sensor is an important part of every routine tune-up. GUARANTEED TO FIT THE FOLLOWING MODELS: 2006-2013 Audi A3 8P 2.0T (Upstream, BPY/CCTA) 2008-2014 Audi TT Mk2 2.0T (Upstream) 2009-2014 Volkswagen CC 2.0T (Upstream, CCTA) 2007-2013 Volkswagen EOS 2.0T (Upstream, BPY/CCTA) 2012-2013 Volkswagen Golf R Mk6 (Upstream) 2006-2014 Volkswagen GTI 2.0T (Upstream, BPY/CCTA) 2006-2010 Volkswagen Jetta 2.0T (Upstream, BPY/CCTA) 2006-2010 Volkswagen Passat B6 2.0T (Upstream, CCTA) REPLACES THE FOLLOWING OE PART NUMBERS: 06J906262AA, 06F906262AC, 06F906262R
TGS5042 - for the detection of Carbon Monoxide Features * Battery operable * High repeatability/selectivity to CO * Linear relationship between CO gas concentration and sensor output * Simple calibration * Long life * UL recognized component * Meets UL2034, EN50291, and RoHS requirements Applications * Residential and commercial CO detectors * CO monitors for industrial applications * Ventilation control for indoor parking garages * Recreational vehicle CO detectors * Marine CO detectors * Fire detection Figaro s TGS5042 is a battery operable electrochemical sensor which offer several advantages over traditional electrochemical sensors. Its electrolyte is environmentally friendly, it poses no risk of electrolyte leakage, can detect concentrations as high as 1% CO, operates in a range from -40 and +70C, and it has lower sensitivity to interferant gases. With a long life, good long term stability, and high accuracy, this sensor is the ideal choice for CO detectors with digital display. OEM customers will find individual sensors data printed on each sensor in bar code from, enabling users to skip the costly gas calibration process and allowing for individual sensor tracking. TGS5042 utilizes a standard AA battery-sized package. Specifications Item Specification Model number: TGS5042-A00 (pin version) TGS5042-B00 (ribbon version) Target gases: Carbon monoxide Typical detection range: 0 ~ 10,000ppm Output current in CO: 1.2~2.4nA/ppm Baseline offset: ±10ppm equivalent Operating temperature: -10C ~ +60C (continuous) -40C ~ +70C (intermittent) Operating humidity: 5 ~ 99%RH (no condensation) Response time (T90): within 60 seconds Storage conditions: -10C ~ +60C (continuous) -40C ~ +70C (intermittent) Weight: approx. 12g Standard test conditions: 20±2C, 40±10%RH
Zirconia O2 Sensors Pr obe Series - Screw Fit Housing The Screwfit Range of zirconium dioxide oxygen sensors has a threaded probe design making it easy to install. Suitable for combustion control within industrial coal/oil/gas/biomass boilers, continuous emission monitoring systems and controlled atmosphere monitoring. F EATURES Zirconium dioxide (ZrO2) sensing elements Long life, non-depleting technology Integral heating element High accuracy Requires an external interface board to operate M18x1.5 screw mount BEN EFITS No reference gas required No need for temperature stabilisation Probe mounting positions available: 55mm M18x1.5 screw mounting TE CHNICAL SPECIFICATIONS Heater voltage Operating Standby 4.35VDC ± 0.1VDC (1.85A) 2VDC (0.85A) Pump impedance at 700°C 6k Permissible gas temperature -100°C to +250°C Gas flow rate 0 - 10 m/s Repetitive permissible acceleration 5g Incidental permissible acceleration 30g Mounting thread M18 x 1.5 O UTPUT VALUES Oxygen pressure range 2mbar - 3bar max Accuracy 5mbar max Internal operational temp 700°C Response time (10 - 90% step) 4s Warm up time (prior to sensor operation) 60s Warm up time (from standby) 20s Output stabilisation time ~ 180s OU TLINE DRAWING ORDER INFORMATION Generate your specific part number using the convention shown below. Use only those letters and numbers that correspond to the sensor options you require omit those you do not.
Product Specifications/Features OEM: 06B906265D MPN: 17090 By Bosch Brand new, Genuine Bosch OEM oxygen sensor. Exposure to carbon, soot, harmful gases, antifreeze, chemicals, and thermal and physical shock will shorten the life of an oxygen sensor. A worn sensor could result in reduced gas mileage, poor engine performance, and/or emissions test failure. That s why checking, and if needed, replacing a worn-out oxygen sensor is an important part of every routine tune-up. GUARANTEED TO FIT THE FOLLOWING MODELS: 2001-2006 Audi A4 1.8T (Upstream, AWM/AMB) 2000-2005 Volkswagen Passat B5 1.8T (Upstream, AUG/AWM) REPLACES THE FOLLOWING OE PART NUMBERS: 06B906265D