Machinable rubber hollows in ShoreA 85 material for turning of seals. Nitrile, Viton ® , Silicon, EPDM, CR/Neoprene in sizes 10 x 20 to 125 x 150, length 150. Tailor made sizes and materials on request.
This extrusion line is mainly used for producing rigid PVC profile in refrigerator, freezer, plastic window, decoration panel etc. changing mould, it can also make rigid-soft co-extrusion. This machine adopts German SIEMENS frequency controller. Temperature controller adopts Japanese famous brands of RKC in order to achieve accurate controlling. Vacuum calibration table adopts water circular seal energy-saving system equipped with central watering and quick joint in order to change different mould conveniently. Calibration table adopts 6m stainless steel plate. haul-off machine adopts caterpillartractor in order to guarantee the stabilization and no-transmutation of extrusion course. This machine has the feature of low waster of energy, good performance, high speed and high efficiency, atc. The finished products produced by this machine has he feature of good surface, stronger compression resistance, light and heat stability, low size-changing and ageing resistance. Final Products
PVC inner spiral noise-abating pipe production line is composed with twin screw extruder, spiral die mould, vacuum sizing table, cooling tank, spiral drawing machine, spiral pipe special-using cutting machine and titling table. The auxiliary machines include high-speed mixing machine, powder feeding machine, etc. This production line is mainly used for extrude PVC spiral pipe which has spiral hollow rigid in the inner wall. This pipe can reach the effect of drainage and noise-abating. Technical parameters Model XYG-50/160 XYG-160/250 Pipe diameter(mm) 50-160 160-250 Output (kg/h) 300 350 Producing speed(m/min) 0.3-5 0.2-4 Main machine model SJSZ-65/120 SJSZ-65/132 Total power(KW) 72 104 Length of production line (m) 20 25 Finished products show
SJ-90 plastic extruder is main frame of extruding moulding plastic product, which can produce kinds of tubes, deformed materials, grain and hollow products working with relative auxiliary machine (including moulding frame head).
Model SJ-BLB1000 plastic extruder wave board set consists of SJSZ-60X22 conic double screw extruder and the relevant wave board forming machine, pulling attachment machine and cutting machine as assistant facilities. It can produce construction used UPVC colorful fire-resistant plastic wacve board repeatedly. If certain parts are replaced, it can also manufacture plastic slab and grid board etc. Equipped with advantages including good plasticizing ability, stable performance, high automation and simple operation, this set turns out to be an ideal production facility for architecture material factories. Mainframe model SJS2-60 x 20 Gear end type clothes rack type slab gear head L=1000MM Forming device big wave R=15 h=16.5 wasp distance¡êo63mm small wave R=9 h=8 wasp distance¡êo36mm forming roll length(mm) 1000 Electric machinery power(kw) 1.5(frequency control) Cooling model dimension(mm) 1000x540 Cooling method water cooling Pulling speed(m/min) 6.5-5 Pulling roll length(mm) 1000 Pulling power (kw) 2.2(frequency control) Incision method cutting( oil pressure) Incision following distance(mm) 500 Pneumatic working pressure(mpa) 0.4-0.6 Finished products show
Major technical parameters (parallel double-screw) Type Item SJS-45/28 SJS-65/26 SJS-80/22 Diameter mm 45 65 80 Rotate speed of screw r/pm 10-60 10-50 4.5-45 Maxim extrusion rate kg/h 40 160 260 Power of main electric motor kw 11 22 37-55 Heating power kw 12 18 24 The soft plasticizing designing ensures the quality of materials. Effective designing theory guarantees the reliable running for extrusion. The high torsion moment adopts special driving force with gear or shaft of high intensity alloy steel, which was processed by penetrating carbon and gear grinding. The newly developed screw can be fit for method of high feeding, ensuring the good fullness and the best feeding distribution for screw The core temperature adjusting device and good feedstuff cylinder cooling in the screw ensures the exact control on the temperature of materials. It along with various die heads , and auxiliary machines is to be used to extrude all kinds of piping, sheets, and strangely-shaped materials and soft and hard PVC granules. Conic double-screw Major technical parameters: (conic double-screw) Type Item SJSZ-45×22 SJSZ-55×22 SJSZ-60×22 SJSZ-65×22 SJSZ-80×22 Diameter of screw mm 45/99 55/110 60/125 65/132 80/156 Rotate speed of screw r/pm 42 40 40 40 37 Maxim Extrusion rate kg/h 70 180 220 250 450 Power of main electric motor kw 18.5 30 30 37 55-75 Heating power kw 15 20 20 28 35
This PVC free foaming board, skinning foaming board extrusion line is composed of special twin-screw extruder, die and downstream equipment, This machine has the features of high output, stable extrusion, high foaming, smooth and wearable surface. Application: Used for cupboard, furniture board, construction decoration material, advertisement board, upholstery for train, car and ship.
1. This machine adopts advanced PLC automatic control system that conquers error of old machine caused by multi electric apparatus; open system adopts OMRON pneumatic element that guarantees stability of process and enhances quality. 2. It breaches many processes of old welder such as manual work for pruning rest material and welding lump and so forth. 3. This welder is double hole full automatic welding equipment; after welding, it cleans rest material automatically; therefore, it guarantee even, firm and beauty of welding angle; the production efficiency is twice of old welder. 4. Mould and frock has up and down layer with adopting precise beeline rail transmission breath that guarantees precision of equipment; the welding way is: automatic heating (firing type) ~ vacuum adsorption ~ welding ~ inner cooling ~ outer cooling ~ automatic outlet. 5. Security protection system: in order to protect pressing, it equips photoelectricity protector before mould with adopting two-hand open button; it adopts HZ12-25 switch; it can open electric case after power failure. 6. Leg period of this welding machine is 11~14 second/double angle; the output can reach 600~650 sets; the stress of welding angle is higher than criterion in same industry.
This PVC window and door extrusion machine is mainly used for producing rigid PVC profile in refrigerator, freezer, plastic window, decoration panel etc. changing mould, it can also make rigid-soft co-extrusion. This machine adopts German SIEMENS frequency controller. Temperature controller adopts Japanese famous brands of RKC in order to achieve accurate controlling. Vacuum calibration table adopts water circular seal energy-saving system equipped with central watering and quick joint in order to change different mould conveniently. Calibration table adopts 6m stainless steel plate. haul-off machine adopts caterpillartractor in order to guarantee the stabilization and no-transmutation of extrusion course. This machine has the feature of low waster of energy, good performance, high speed and high efficiency, atc. The finished products produced by this machine has he feature of good surface, stronger compression resistance, light and heat stability, low size-changing and ageing resistance.
Brief introduction PVC agriculture lay flat hose is widely used in agriculture irrigation, project, mining, environment protection tec. This machine adopts European advanced technology but made some improvements by us. It adopts terylene yarn weaven hose as reinforced lay, the terylene yarn weaven hose is inserted into vertical die by leading mould and device, then the hot PVC coated on the out and inner sides of the yarn by high pressure and make into flat hose at once. After cooling, dry, printing and winder, the lay flat hose will form roll as setted length. Feature: (1) Hi-strength terylene yarn and qualified PVC synthesis materials. (2) Light weight, good flexibility, bright color, smooth smearing layer. (3) Flat roll and easy for take back, convenient for moving and non limitation for length. (4) Capable for keeping the flexibility and elasticity under the low-temperature water. (5) Anti-hi pressure, corrosion resistance and ageing resistance. Technical parameters: Model ZXSJ-70 ZXSJ-90 ZXSJ-120 L/D SJ70×28 SJ90×28 SJ120×28 Hose size(mm) 1 6 inch 48 inch 610 inch Speed(m/min) 1-3m/min 1-3m/min 1-3m/min Cooling water(m3/h) 1 2 4 Total power(kw) 25 35 50 Overall size(LxWxH)mm 8000x2000x1700 8000x2500x2000 10000x3000x2000 Weight(kg) 2500 4000 6000