Brass metal stampings are often used in applications where low friction is required; since brass is softer than many other metals, metal stampings made from it can be utilized in situations where it is important that no sparks be struck. Brass metal stampings are often used in plumbing, hardware, fastener, and electrical applications. Features of our products: 1. Material: Steel, Stainless steel, Aluminum sheet, Copper etc. 2. Surface treatment: Zinc plated, Powder coating, Paint, Nickel plated etc. 3. Requirement: based on drawing and quantity. 4. Stamping equipment: 10-500T 5. Packing: we will offer you the standard package which includes plastic film, foam, carton and wooden box which is suitable for transporting 6. Delivery time: Within 20 days after receiving your 30% deposit 7. Payment terms: 30% payment in advance and the rest payment within 5 days after the B/L date.
Steel metal stampings that are exposed to harsh conditions are susceptible to rust and corrosion due to the high iron content. To protect against deterioration of the steel metal stampings from exposure, they can be manufactured from steel that has been already coated with tin or zinc (electro galvanized or hot dip galvanized) or even pre-painted. Alternatively, the steel metal stampings can be plated or painted after manufacture with a wide variety of coatings and finishes. Features of our products: 1. Material: Steel, Stainless steel, Aluminum sheet, Copper etc. 2. Surface treatment: Zinc plated, Powder coating, Paint, Nickel plated etc. 3. Requirement: based on drawing and quantity. 4. Stamping equipment: 10-500T 5. Packing: we will offer you the standard package which includes plastic film, foam, carton and wooden box which is suitable for transporting 6. Delivery time: Within 20 days after receiving your 30% deposit 7. Payment terms: 30% payment in advance and the rest payment within 5 days after the B/L date.
The most commonly used type of stainless steel for metal stampings is the so called 300 series (Types 301,302 and 304), due to its high form-ability and good corrosion resistance. The 300 series stainless steels are available in various tempers and finishes to accommodate a wide range of metal stamping requirements. Features of our products: 1. Material: Steel, Stainless steel, Aluminum sheet, Copper etc. 2. Surface treatment: Zinc plated, Powder coating, Paint, Nickel plated etc. 3. Requirement: based on drawing and quantity. 4. Stamping equipment: 10-500T 5. Packing: we will offer you the standard package which includes plastic film, foam, carton and wooden box which is suitable for transporting 6. Delivery time: Within 20 days after receiving your 30% deposit 7. Payment terms: 30% payment in advance and the rest payment within 5 days after the B/L date.
If exposed to harsh conditions, spring steel metal stampings are susceptible to corrosion (rust) due to the iron content in the metal. To protect the spring metal stamping , or if desired for cosmetic purposes, the spring metal stamping can be plated with a wide variety of coatings and finishes. However, if an electroplating method is used to deposit the coating on spring steel metal stampings they must be again heat treated after plating to relieve hydrogen embrittlement in the spring steel. Features of our products: 1. Material: Steel, Stainless steel, Aluminum sheet, Copper etc. 2. Surface treatment: Zinc plated, Powder coating, Paint, Nickel plated etc. 3. Requirement: based on drawing and quantity. 4. Stamping equipment: 10-500T 5. Packing: we will offer you the standard package which includes plastic film, foam, carton and wooden box which is suitable for transporting 6. Delivery time: Within 20 days after receiving your 30% deposit 7. Payment terms: 30% payment in advance and the rest payment within 5 days after the B/L date.
Stainless steel metal stampings can be made from many different types of stainless steel which are created by varying or adding alloying elements such as chromium, nickel, carbon, molybdenum and nitrogen. Other options for stainless steel metal stampings are the use of 400 series stainless steel and 17-7 PH which can be heat treated after forming for additional strength. Features of our products: 1. Material: Steel, Stainless steel, Aluminum sheet, Copper etc. 2. Surface treatment: Zinc plated, Powder coating, Paint, Nickel plated etc. 3. Requirement: based on drawing and quantity. 4. Stamping equipment: 10-500T 5. Packing: we will offer you the standard package which includes plastic film, foam, carton and wooden box which is suitable for transporting 6. Delivery time: Within 20 days after receiving your 30% deposit 7. Payment terms: 30% payment in advance and the rest payment within 5 days after the B/L date.
Spring steel for metal stampings is typically available in grades 1050, 1070, and 1090 with the higher grades containing more carbon and therefore making the spring steel metal stampings harder, but also more brittle. Spring steel if often used to make clips, clamps, and flat springs for use in automotive, appliance and other industrial applications. Features of our products: 1. Material: Steel, Stainless steel, Aluminum sheet, Copper etc. 2. Surface treatment: Zinc plated, Powder coating, Paint, Nickel plated etc. 3. Requirement: based on drawing and quantity. 4. Stamping equipment: 10-500T 5. Packing: we will offer you the standard package which includes plastic film, foam, carton and wooden box which is suitable for transporting 6. Delivery time: Within 20 days after receiving your 30% deposit 7. Payment terms: 30% payment in advance and the rest payment within 5 days after the B/L date.
Brass metal stampings are most commonly made from the 260 brass alloy, also known as cartridge brass, since it possesses the optimum combination of strength and ductility, while keeping the high form-ability properties of copper. Depending on the requirements of the brass metal stamping , the 260 brass alloy is available in a wide range of tempers from soft to spring (8#s hard). Brass metal stampings can also be made from tin coated brass or tin coated after forming to increase electrical conductivity and solder-ability. Features of our products: 1. Material: Steel, Stainless steel, Aluminum sheet, Copper etc. 2. Surface treatment: Zinc plated, Powder coating, Paint, Nickel plated etc. 3. Requirement: based on drawing and quantity. 4. Stamping equipment: 10-500T 5. Packing: we will offer you the standard package which includes plastic film, foam, carton and wooden box which is suitable for transporting 6. Delivery time: Within 20 days after receiving your 30% deposit 7. Payment terms: 30% payment in advance and the rest payment within 5 days after the B/L date.
Spring steel metal stampings are made from low alloy medium to high carbon steel. Spring steel used in metal stampings is typically in the annealed or soft state as this allows for more intricate and severe forming to take place in the metal stamping operation. Although tempered spring steel is available, the hardness of this material makes severe forming in the metal stamping process very difficult due to the inherent spring back in the material. Features of our products: 1. Material: Steel, Stainless steel, Aluminum sheet, Copper etc. 2. Surface treatment: Zinc plated, Powder coating, Paint, Nickel plated etc. 3. Requirement: based on drawing and quantity. 4. Stamping equipment: 10-500T 5. Packing: we will offer you the standard package which includes plastic film, foam, carton and wooden box which is suitable for transporting 6. Delivery time: Within 20 days after receiving your 30% deposit 7. Payment terms: 30% payment in advance and the rest payment within 5 days after the B/L date.
Stainless steel metal stampings are typically used in applications where the corrosion and oxidation resistant properties of stainless steel are desirable. Stainless steel metal stampings can be found in household appliances, medical devices, and industrial equipment. Stainless steel metal stampings are also widely used in the aerospace and automobile industries. Features of our products: 1. Material: Steel, Stainless steel, Aluminum sheet, Copper etc. 2. Surface treatment: Zinc plated, Powder coating, Paint, Nickel plated etc. 3. Requirement: based on drawing and quantity. 4. Stamping equipment: 10-500T 5. Packing: we will offer you the standard package which includes plastic film, foam, carton and wooden box which is suitable for transporting 6. Delivery time: Within 20 days after receiving your 30% deposit 7. Payment terms: 30% payment in advance and the rest payment within 5 days after the B/L date.
Spring steel metal stampings made from annealed spring steel have to be heat treated (hardened and tempered) after forming to acquire their spring properties, that is the ability to retain or return to their original configuration after significant or repeated pressure. However, such heat treating does carry with it the potential for distortion of the spring steel metal stamping . Features of our products: 1. Material: Steel, Stainless steel, Aluminum sheet, Copper etc. 2. Surface treatment: Zinc plated, Powder coating, Paint, Nickel plated etc. 3. Requirement: based on drawing and quantity. 4. Stamping equipment: 10-500T 5. Packing: we will offer you the standard package which includes plastic film, foam, carton and wooden box which is suitable for transporting 6. Delivery time: Within 20 days after receiving your 30% deposit 7. Payment terms: 30% payment in advance and the rest payment within 5 days after the B/L date.