Detailed Product Description automobile wheel balancer 1.Zigbee wheel 2.3600 Line 8-beam CCD 3.CE by Germany s TUV 4.Inclinometer from Finland s V The automobile wheel balancer (BD-660) has the following features: High accuracy inclinometer and it can be work normally within the temperature of - 5°C~50°C and the humidity of 5%~95%; Caster measurement directly and wheel aligner no turn-table reading need ; The sensors can work continuously for nearly 15 hours with the 1800mA batteries;
Detailed Product Description Motor Power: 0.2Kw~0.25Kw Power Supply: 110V/220V/50~60Hz Rotating Speed: 215r.p.m Net Weight: 82kg Tire Balancer RP2201 Tire Balancer RP2201 Technical Data Power Supply 110V/220V/50~60Hz Motor Power 0.2Kw~0.25Kw Rim Diameter 12"-24" Rim Width 1.5"~20"/40~510mm Max. Wheel Weight 70kg Max. Wheel Diameter 960mm Rotating Speed 215r.p.m Cycle Time 8s Noise 70db Balancing Precision ±1g Net Weight 82kg Gross Weight 107kg Self calibration and self diagnosis programs. Static and standard dynamic balancing and special rim balancing. Unbalance value displayed accurately, and the position to add the balance weight is indicated definitely.
Detailed Product Description Wheel aligner 1.Bluetooth/Zigbee wireless communication 2.CE certification 3.Sensors needn t be calibrated within 3-5 years The Wheel aligner (Model: BD-800) has the following features: Latest version of Bluetooth/Zigbee wireless communication system; 8-beam CCD optical sensors; High accuracy inclinometer from VTI of Finland and it can be work normally within the temperature of -25°C~50°C and the humidity of 5%~95%. Caster measurement directly and no turn-table reading need ; Sensors can be exchanged individually without re-calibrate ; Electronic-level display; The sensors can work continuously for nearly 18 hours with the 1800mA batteries; Ten thousand types of vehicle data which can be updated and edited conveniently; The software is easy to use with the full functions and high reaction speed; Linux, Winxp or Vista operating systems supported. Measuring parameter Measuring accuracy Measuring range Toe angle ±0.03° ±20° Single toe angle ±0.01° ±10° Camber angle ±0.02° ±15° Trust angle &set back ±0.02° ±9° Kingpin caster angle ±0.05° ±18° Kingpin inclination angle ±0.05° ±18° Steering angle ±0.1° ±24°
Detailed Product Description car lift 1.Zigbee wireless communication 2.CE certification 3. Sensor can be changed without calibration The car lift (Model: BD-800) has the following features: Latest version of Bluetooth/Zigbee wireless communication system; 8-beam CCD optical sensors; High accuracy inclinometer from VTI of Finland and it can be work normally within the temperature of -25°C~50°C and the humidity of 5%~95%. Caster measurement directly and no turn-table reading need ; Sensors can be exchanged individually without re-calibrate ; Electronic-level display; The sensors can work continuously for nearly 18 hours with the 1800mA batteries; Ten thousand types of vehicle data which can be updated and edited conveniently; The software is easy to use with the full functions and high reaction speed; Linux, Winxp or Vista operating systems supported.
Detailed Product Description car tire/wheel balancer with CE 1.manufacturer 2.CE certificate 3.Suitable for rim with large center hole B-082 car tire/wheel balancer with CE *Automatic Start/stop *Hand-operated distance and wheel diameter input *Self diagnosis and calibration *Gram/ounce selection and millimeter/inch selection *Protection cover available *Static,dynamic and ALU1/ALU2/ALU3 functions for light alloy wheels *Suitable for rim with large center hole without extra device because of the more coarse balancing spindle;
Detailed Product Description 15"color VGA LCD. Automatic distance. Wheel diameter measuring. 3 aluminum alloy rim programs. Tire Balancer RP2203 Tire Balancer RP2203 Technical Data Power Supply 110V/220V/50~60Hz Motor Power 0.2Kw~0.25Kw Rim Diameter 12"-24" Rim Width 1.5"~20"/40~510mm Max. Wheel Weight 70kg Max. Wheel Diameter 960mm Rotating Speed 215r.p.m Cycle Time 8s Noise 70db Balancing Precision ±1g Net Weight 92kg Gross Weight 118kg 1. 3 aluminum alloy rim programs and static program. 2. Automatic distance and wheel diameter measuring. 3. It is equipped with the standard protection cover which has been set up properly. 4. The machine starts with put down the cover and stops when lift up the cover. Or the operator can press the START button. 5. There are self-calibration and self-diagnosis functions. 6. 15"color VGA LCD.
Technical parameter: 1. Adjustable rotation speed range: 0~4000RPM 2. Double series of graduates: 45CC 3. Volume of oil tank: 100L 4. Temperature stabilization: 40±2 5. Test oil filtering unit: 5 6. DC. Supply: 12/24V 7. Feed pressure: 0~0.4MPa (low), 0~4MPa (high) 8. Air pressure (MPa): -0.03~0.3 9. Rack travel range: 0~25mm 10. 3-phase power supply: 380V/50Hz or on request 11. Flywheel inertias moment: 0.8kg·m 2 12. Center height: 125mm 13. Output power: 7.5kw~15kw 14. Overall dimensions: 200X90*170CM 15. Net weight (kg): 1000. 16. Average trouble-tree working time of test stand: 2500h. 17.Measure the advance timer device 18.User can change the tempreature 19.Color of test bench : Green /yellow or on request Function 1. The testing debugging about oil-supply amount of each cylinder and oil-supply uniformity of injection pump. 2. Check the oil-supply spacing of each cylinder and oil supply starting point in the static state. 3. Check and adjust the performance of mechanical speeder. 4. The sealing inspection of injection pump. 5. The test of value of distribution pump 6. The test of loop oil of distribution pump. 7. Check the intracavity pressure of distribution pump. 8. Check the performance of air-film mechanical speeder. 9. Check the pump of pressurized compensatory . 10. Measurement of rack travel. 11. The inspection of oil delivery pump. Main Characteristics: 1. Industrial LCD English and Chinese menu; Measuring the Rack Bar journey exactly. Debug speed curve of injecting oil pump. Automatic oil unloading device Print and keep debugging data of pump. Large inertia flywheel--- steady drive and good balance.
Application :
the system is suitable for detection of BOSCH , DENSO , DELPHI and SIEMENS common rail pump and injectors. Such as CP1 , CP2.CP3 , HP3 series injector pump and the type
Detailed Product Description automatic electronic wheel balancer: (SBM99) Max wheel diameter:10"-24"(255-615mm) Max wheel -20"(40-510mm) Product features: 1. Automatic start/stop 2.Self diagnosis 3.Self calibration 4.stadium style weight tray 5.Changeable between gram and ounce 6.Changeable between millimeter and inch 7.Protection cover 8.4ALU functions for light alloy wheels 9.Full screen display for a.b.d. reading 10.Automotic start of measuring rim by lowering wheel guard Use Range: 1.Automotive repairing company 2.Transportation company, motorcycle 3.Tire specialized service station Technical Specification Power supply 110V/220V Motor power 185~320W Rimdiameter 255~615mm10"24") Rim width 40~510mm(1.5"-20") Balancing accuracy +/- 1 gram / .035 oz Balancing speed 190r/min Bead breaker force 8sec. Noise level 70dB Package size(mm) 970×550×1380 Weight(with cover) 100/110kg
Detailed Product Description Wheel aligner 1.Bluetooth/Zigbee wireless communication 2.CE certification 3.Sensors needn t be calibrated within 3-5 years The Wheel aligner (Model: BD-800) has the following features: Latest version of Bluetooth/Zigbee wireless communication system; 8-beam CCD optical sensors; High accuracy inclinometer from VTI of Finland and it can be work normally within the temperature of -25°C~50°C and the humidity of 5%~95%. Caster measurement directly and no turn-table reading need ; Sensors can be exchanged individually without re-calibrate ; Electronic-level display; The sensors can work continuously for nearly 18 hours with the 1800mA batteries; Ten thousand types of vehicle data which can be updated and edited conveniently; The software is easy to use with the full functions and high reaction speed; Linux, Winxp or Vista operating systems supported. Measuring parameter Measuring accuracy Measuring range Toe angle ±0.03° ±20° Single toe angle ±0.01° ±10° Camber angle ±0.02° ±15° Trust angle &set back ±0.02° ±9° Kingpin caster angle ±0.05° ±18° Kingpin inclination angle ±0.05° ±18° Steering angle ±0.1° ±24°