Home » Showroom » » Products » Forging » Pillar Hydrant
Company Info
Shanxi Solid Industrial Co. , Ltd Shanxi Solid Industrial Co. , Ltd

Street Address: 1501, Building B, Dingyuan Shidai Zhongxin, Yingzenanjie

City: Taiyuan

Province: Shanxi

Country/Region: China

View Contact Details

Pillar Hydrant

Pillar Hydrant

Application:  Pillar Hydrant Size: DN 100, ...

Market Type:  After Market

Packing:  Wooden Cases And Protection Layer

Samples:  Free

Maximum Prodcution Capacity:  3000 Ton/Tons Per Month

Delivery Time:  Each One Is Different.

Place of origin:  China

Export Ratio:  91% - 100%

Delivery Port:  XINGANG,SHANGHAI,DALIAN

Minimum Order:  0.5Ton/Tons

Product Attribute:

Applicationt: 

Pillar Hydrant Size: DN 100, DN 150 Body Material: cast iron BS 1452, Adaptor Material: brass or bronze Coating: Internal and external with fusion bonded epoxy coating. or liquid painting Color: blue color, black color, red color, gray color, etc Epoxy Coated. Working pressure: 25bar (350PSI) Notes: Used as auxiliary connection through which the fire department can pump water to supplement existing water supplies. Pillar Hydrant widespread and convenient in life for fire fighting. This is safety for children, because it is fixed. Must check the fire hydrant every month or before major holiday. Removing clutter around the stem end, will special wrench in rod head, check whether appropriate, turn the valve stem, filling lubricating oil. Using oil sands erasing rust stains on outlet thread, check the rubber gasket in cap are in good condition. Open the fire hydrant, check the situation of water supply, put all rusty water and then shut, and observe any slack phenomenon. Exterior paint falls off should be timely repair. Check and remove the obstacles near fire hydrant.

Production Description:

    Pillar Hydrant Size: DN 100, DN 150
Body Material: cast iron BS 1452,
Adaptor Material: brass or bronze
Coating: Internal and external with fusion bonded epoxy coating. or liquid painting
Color: blue color,black color,red color,gray color,etc Epoxy Coated.
Working pressure: 25bar (350PSI)
Notes:

Used as auxiliary connection through which the fire department can pump water to supplement existing water supplies. Pillar Hydrant widespread and convenient in life for fire fighting. This is safety for children, because it is fixed. Must check the fire hydrant every month or before major holiday.
Removing clutter around the stem end,will special wrench in rod head,check whether appropriate,turn the valve stem,filling lubricating oil.
 
Using oil sands erasing rust stains on outlet thread,check the rubber gasket in cap are in good condition.
Open the fire hydrant,check the situation of water supply,put all rusty water and then shut,and observe any slack phenomenon.
Exterior paint falls off should be timely repair.
Check and remove the obstacles near fire hydrant.

Send your message to this supplier

Enter between 20 to 3,000 characters, English only.
http://en.gasgoo.com/new/common/contactsupplier.aspx?type=4&id=1125640