Product List

FR is a composites material withbronze wire-mesh as frame andcalendered with a film of filled polytetrafluoroethylene. This is of low friction and lowwear, and is rather soft and is to be applied readily by inserting between thetwo rubbing metal ...

WZB-2 boundary lubrication bushing is based on a composite material with 3 firmly bonded layers : steel as backing , sintered bronze spherical powder as interlayer and modified POM. as lining layer. It fits well for low speed, heavy duty and normal ...

WZB JF-800 bimetal bushing is based on steel and sintered with CuPb10Sn10 as a lining layer. This type has the best performance within the range of Cu-Pb alloy constructured bushing. Thereforce it has a wide application and is mostly suitable for ...

WZB JF-800 bimetal bushing is based on steel and sintered with CuPb10Sn10 as a lining layer. This type has the best performance within the range of Cu-Pb alloy constructured bushing. Thereforce it has a wide application and is mostly suitable for ...

WZB-2boundary lubrication bushing is based on a composite material with 3 firmlybonded layers : steel as backing , sintered bronze spherical powder asinterlayer and modified POM. as lining layer. It fits well for low speed, heavyduty and normal ...

WZB-090 is a kind of bushes wrapped by bronze strip. The bronze is of particular formulation with high specific gravity and on its surface may be incorporated with spherical of diamond shaped indentations or oil grooves as required by customers. It ...

Specifications: 1) Surface material: CuSn 6.5 P 0.1 + Gr 2) Load capacity: 65N/mm 2 3) Friction coef (µ): 0.06 - 0.2 4) Temperature limit: -100 ~ 260 o C 5) Speed limit: 4m/s

This is copper or aluminum or plastics bastcs based material, on which the rollers are aranged oderly in certain angle and intervals. Moreover, the retaining technique is improved that dropping of the rollers can be thoroughly prevented.The friction ...

JDB-4 is based on cast iron Ht250 and embedded with solid lubricant. Verygood performance when under low load. Not suitable for middle and high load. A typical cost saving material, can substitute JDB-2 to be applied in theposition without high ...

WZB-1D hydraulic bushing is developed on the basis of SF-1P and meanwhile considering the motionway of oil pump and damper. It is the substitute of and parallels inperformance with abroad DP4. In addition to covering the same usage of SF-1P. SF-1Din ...