EZO Conductivity Circuit
EZO-EC EZO Conductivity Circuit Operating principle
An E.C. (electrical conductivity) probe measures the electrical conductivity in a solution. It is commonly used in hydroponics, aquaculture and freshwater systems to monitor the amount of nutrients, salts or impurities in the water.
Inside the conductivity probe, two electrodes are positioned opposite from each other, an AC voltage is applied to the electrodes causing cations to move to the negatively charged electrode, while the anions move to the positively electrode. The more free electrolyte the liquid contains, the higher the electrical conductivity.
EZO-EC EZO Conductivity Circuit Dimensions
EZO-EC EZO Conductivity Circuit Power consumption
LED | MAX | STANDBY | SLEEP | |
5V | ON | 50 mA | 18.14 mA | 0.7 mA |
OFF | 45 mA | 15.64 mA | ||
3.3V | ON | 35 mA | 16.85 mA | 0.4 mA |
OFF | 34 mA | 15.85 mA |
Parameter | MIN | YP | MAX |
Storage temperature (EZO Conductivity) | -60 °C | 150 °C | |
Operational temperature (EZO Conductivity) | -40 °C | 25 °C | 125 °C |
VCC | 3.3V | 5V | 5.5V |
Reads |
Conductivity = S/cm Total dissolved solids = ppm Salinity = PSU Specific gravity (sea water only) = 1.00 - 1.300 |
Range | 0.07 - 500,000+ S/cm |
Accuracy | +/- 2% |
Max rate | 1 reading per sec |
Supported probes | K 0.1 - K 10 any brand |
Calibration | 1 or 2 point |
Temp compensation | Yes |
Data protocol | UART & I2C |
Default I2C address | 100 (0x64) |
Operating voltage | 3.3V - 5V |
Data format | ASCII |
Circuit dimensions | 13.97mm x 20.16mm (0.55" x 0.79") |
Weight | 1.77 grams |
Related Product Tags:
coolant sensor , crank sensor , Crank Shaft Sensor , egr sensor , electronic sensor , s3 fuel sensor , Fuel Sender , fuel sensor , fuel sensor assembly , hall sensor , head lamp sensor , car head lamp sensor , impact sensor , mark sensor , oil level sensor , throttle sensor