Product Name: Restorer For rain sensor Country-specific product Usage: 1.Pull up or remove the rain sensor while cleaning with tissue, and stuck the leash of the rain sensor by the rain sensor mate, rubbing to-and-fro in 10cm distance slowly. 2.Rubbing it by the thicker side as marked, then use thinner side and put back. Test rub with water and rub the unsatisfied part. 3.The rain sensor for sedan limousine must be rubbed slowly. Precautions: 1.Rubbing the rain sensor may produce sudden heat causing the leash to melt and adhere to the channel slot, which will damage the rain sensor and restorer. Therefore, it is forbidden to polish the entire leash vertically as to avoid heating up. It is recommended to wipe dry the rain sensor before rubbing, otherwise it may affect the effect by the leash powder rubbed and adhere to the restorer.
this tire vulcanizer can be used to repair tube and wheel Double surface vulcanize, high quality heating pipes, quick heating, more durable Temperature adjustable equipment ensure adequate vulcanizing temperature Provide heat conducted sand bag, make tires under vulcanization more conforms to normal condition. Technical specification: Power supply: 220v Motor power: 1.5kw Working temperature: Adjustable Maximum sulfuration area: 80×70mm Package size: 73.5×35.5×128 cm Weight: 80kg/82kg
1.special drainage system 2.ultrasonic cleaner with timer 3.intergrated into one automatic mode 4.graphic panel,user-friendly Product description: INJ-6B Injector Cleaner & Tester integrates the most advanced control technology and environmental concepts. INJ-6B can clean and test all kinds of automotive injectors by simulating engine working conditions and can also on-vehicle clean the fuel supply system. Optional adaptor kit package covers all injectors of different car makes Ultrasonic cleaner with timer User-friendly with graphic operation panel & large buttons Liquid level display is integrated with tank drainage to make an easier & faster operation One port is used for both fuel filling and fuel return Automatic drainage is controlled by solenoid valve to realize uniformity test Functions: 1. Direct flush 2. Reverse flush 3. Ultrasonic cleaning 4. On-vehicle cleaning 5. Uniformity & Sprayability test 6. Leakage test 7. Injecting flow test 8. Auto cleaning-test function Features: 1. Stepless pressure regulation technology brings a small oil pressure fluctuation and wide tuning range. 2. Clean and test both high resistance and low resistance injectors. 3. Solenoid valve controls drainage of oil 4. Graphic interface 5. LED of the background light 6. Optional adaptor kit package to cover all injectors of different car makes Specifications: Power supply: AC220V~50/60Hz, AC110V~50/60Hz Input power: 350W Pressure: 0~7bar Flow test accuracy: ±2% Simulated RPM range: 0~9999rpm, Step:10rpm PW range: 0.1~30ms, Step: 0.1ms Timing range: 1~30min Ultrasonic timing range: 1~15min Dimensions: 670*470*600mm Gross weight: 32Kg
foam cleaning machine to clean the car Technical Data: Capacity of tank: 80Lt Working pressure: 2.5-3.8 Bar Tube diameter: 13mm Tube length: 6m Packing dimensions: 43×50×87 CMS
1.wireless diagnosis 2.fuel injector cleaner 3.Additional functions available for customer choice Product description C-501 Multi-system Maintenance & Inspection Center integrates fuel injector cleaner and wireless diagnosis in one platform to save space and labor time for the garage shops. We definitely believe that this efficient and digital equipment will be profitable for you. User-friendly with graphic operation & large buttons Automatic drainage is controlled by solenoid valve to realize uniformity test Ultrasonic cleaner with timer One port is used for both fuel filling and fuel return Functions 1.Cleaning & testing functions a. Direct flush b. Reverse flush c. Ultrasonic cleaning d. On-vehicle cleaning e. Uniformity & Sprayability test f. Leakage test g. Injecting flow test h. Auto cleaning-test function 2. Auto diagnostic functions a. Retrieve generic and Manufacturer's specific codes on all 1996 to current year Asian, European and American car makes b. Read fault codes and display code definition c. Read live data stream and display data in waveform d. Turn off check engine light, clear trouble codes & reset monitors Features 1. World's first integration of car maintenance,testing and diagnosis 2. Multilanguage applicable including English, German,French,Spanish, Dutch, Russian, etc. 3. LED display with clear menu and easy operation 4. Wireless diagnosis and digital wireless fuel pressure test 5. Customized function modules for option 6. Wide models can be tested with stable performance and reliable data 7. Digital wireless fuel pressure gauge with adaptors for all car makes 8. A variety of advanced design integration leads the new trend of vehicle maintenance & inspection products Specifications Power supply: AC220V~50/60Hz / AC110V~50/60Hz Input power: 350W Fuel system cleaning & test pressure: 0~7bar Wireless frequency: 433MHz Diagnostic protocol standard: All OBD compliance (OBDII, EOBD, CAN) car makes Pressure testing range for wireless module: 0~20bar Power supply: Dry cell for wireless module DC 9V
Tyre Retreading Machine 1)A high degree of automation 2)High quality,high efficiency 3)Energy-saving,easy handling Tyre Retreading Machine Building Machine pressing speed 21-42m/min(high speed) .Line speed of tire when pressed by pinch roller 150mm/min Motor for top roller 0.85/0.75Kw Working air pressure 0.6-0.8Mpa Motor for pinch roller transverse moving 0.45/0.75kw 700/1400r/mzn .Total power: 2.25kw External dimensions (L × W × H 1860×2200×2100 (mm) Weight: 850kg Functions: 1 self-contained precision casting plate without inner tyre,inflatable. 2,to laminate precureed tread and medium mat rubber onto the used tyre core pretreated. Our company can supply a line of tyre retreading machine,if you are interested in our product,you can contact me ,I will give you the best price. If you have any question ,please not hesitate to contact me .
Repair Bench for Auto Cross Beam W-800 1.Ten-ton round towers 2.360 degree pulling power. 3.With high-strength Clamp chain Repair Bench for Auto Cross Beam W-800 1. INTRODUCTION: mini auto repair bench is the new product improved by WANT Company. With excellent ten-ton round towers, you will enjoy true 360 degree pulling power. With high-strength Clamp chains and pulling accessories, you can recover any car distortion with ease. Famous Universal Clamping System anchors any vehicle rock-solid. With down pulley, it will make down-traction easy. 2. SPECIFICATIONS: Platform length 3400mm Platform width 800mmPlatform height 120-1200mmPulling power of tower 10tonsPulling power of height 1800mmpost working range 360degree pneumatic pressure range 0.8mpa total weight 1800kgs
1.recovery/recycling 2.discharge used oil 3.vacuum/refill new oil 4.recharging 5.full automatic mode Product description: RCC-6A A/C Service Station is the latest production for refrigerant recovering, recharging and purifying, developed based on durable components and reliable SCM control programs in compliance with SAE J2788 standard. RCC-6A A/C Service Station meets the needs of different customer groups with simple operation, nice shape and its most cost-effective & lifetime technical support. Highly integrated pipeline modules Original imported high-quality parts One-click buttons, simple operation, easy to use Functions: 1. Main Functions a. Recovering/Recycling b. Discharging used oil c. Vacuum d. Refilling new oil e. Recharging f. Full Automatic mode 2. Auxiliary Functions a. Vacuum system piping b. Multiple alarms c. Maintenance procedures d. Part inspections e. Calibration of load cell f. Parameters setting g. Heater for tank (optional) h. Non condensable gas discharging (Manual) Features: 1. Integration of the latest recycling and purifying technology ensures purified refrigerant to reach the reusable standard 2. Compact construction and parts versatility help repair and maintenance 3. The most advanced SCM control programs ensures all functions operate reliably 4. Varieties of selfinspection&protection measures ensure a safe and fast operation 5. Unique maintenance procedures make an easy equipment maintenance 6. Be in compliance with SAE J2788 standard 7. Graphic interface makes it easy to operate 8. Oil~gas seperating rate attains to 98% during recycling process Specifications: Power supply: AC220V±10%~50/60Hz, 110V±10%~60Hz Vacuum pump: 4.5CFM, 10Pa Compresor: 12cc, MBP/HBP Electronic scale accuracy (refrigerant tank): ±10g Max. working pressure: 17.5bar Dry filter: 0.122L Refrigerant tank volume: 12L Recycling speed: 0.5Kg/Min (max) Recharging speed: 2Kg/Min (max) LED display Electronic scale accuracy (oil tank): ±5g Heater power: 300w Language: Chinese, English Dimension: 620*580*1020mm Gross weight: 72Kg
The New Tire Recycling Machine 1)A high degree of automation 2)High quality,high efficiency 3)Energy-saving,easy handling The Newest Tire/Tyre Recycling Machine pressing speed 21-42m/min(high speed) .Line speed of tire when pressed by pinch roller 150mm/min Motor for top roller 0.85/0.75Kw Working air pressure 0.6-0.8Mpa Motor for pinch roller transverse moving 0.45/0.75kw 700/1400r/mzn .Total power: 2.25kw External dimensions (L × W × H 1860×2200×2100 (mm) Weight: 850kg Functions: 1 self-contained precision casting plate without inner tyre,inflatable. 2,to laminate precureed tread and medium mat rubber onto the used tyre core pretreated. Our company can supply a line of tyre retreading machine,if you are interested in our product,you can contact me ,I will give you the best price. If you have any question ,please not hesitate to contact me .